Activated later
Unit of Measure

Key Dimensions

UPC

 N/A 0053893047720

Cone Part Number

 N/A GLL639249

Cup Part Number

 N/A GLL639210

Bore (d)

 N/A 7.7500 in196.850 mm

O.D. (D)

 N/A 9.5000 in241.300 mm

Width (T)

 N/A 0.9375 in23.813 mm
Dynamic Radial Load Rating - 1M Revs (C1)1 N/A 38800 lbf172000 N
Dynamic Radial Load Rating - 90M Revs (C90) 2 N/A 10100 lbf44700 N
e Factor3 N/A 0.42
K Factor4 N/A 1.4
Y Factor 5 N/A 1.44

Other Dimensions

Weight

 N/A 4.6 lb2.10 Kg

Inner Ring Width (B)

 N/A 0.9062 in23.017 mm

Outer Ring Width (C)

 N/A 0.6875 in17.463 mm
Effective Center Location6 N/A 0.69 in17.5 mm
Max Shaft Fillet Radius7 N/A 0.060 in1.520 mm
Max Housing Fillet Radius8 N/A 0.06 in1.52 mm

Shaft Backing Shoulder Dia. - Frontface (da)

 N/A 7.99 in203 mm

Shaft Backing Shoulder Dia. - Backface (db)

 N/A 8.07 in205 mm

Housing Backing Shoulder Dia. - Frontface (Da)

 N/A 9.31 in236.47 mm

Housing Backing Shoulder Dia. - Backface (Db)

 N/A 9.13 in231.90 mm

Cage Location rel. to BF (Aa)

 N/A 0.04 in1 mm

Cage Location rel. to FF (Ab)

 N/A 0.14 in3.6 mm

Ratings

Dynamic Axial Rating - 90M Revs (Ca90)9 N/A 7190 lbf32000 N

Static Radial Load Rating (C0)

 N/A 76300 lbf340000 N

Factors

G1 Factor

 N/A 443

G2 Factor

 N/A 230.2
Geometry Factor (Cg)10 N/A 0.133
  • 1 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
  • 2 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
  • 3 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 4 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 5 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 6 Negative value indicates effective center inside cone backface.
  • 7 These maximum fillet radii will be cleared by the bearing corners.
  • 8 These maximum fillet radii will be cleared by the bearing corners.
  • 9 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
  • 10 Geometry constant for Lubrication Life Adjustment Factor a3l.