Activated later
Unit of Measure

Key Dimensions

UPC

 N/A 0053893880150

Cone Part Number

 N/A X30219G

Cup Part Number

 N/A Y30219G

Bore (d)

 N/A 95 mm3.7402 in

O.D. (D)

 N/A 170 mm6.6929 in

Width (T)

 N/A 34.5 mm1.3583 in
Dynamic Radial Load Rating - 1M Revs (C1) 1 N/A 265000 N59700 lbf
Dynamic Radial Load Rating - 90M Revs (C90) 2 N/A 68800 N15500 lbf
e Factor 3 N/A 0.42
K Factor 4 N/A 1.39
Y Factor 5 N/A 1.43

Other Dimensions

Weight

 N/A 3.0 Kg6.6 lb

Inner Ring Width (B)

 N/A 32.000 mm1.2598 in

Outer Ring Width (C)

 N/A 27 mm1.063 in
Effective Center Location6 N/A -1 mm-0.04 in
Max Shaft Fillet Radius7 N/A 3.050 mm0.120 in
Max Housing Fillet Radius8 N/A 2.54 mm0.1 in

Shaft Backing Shoulder Dia. - Frontface (da)

 N/A 108 mm4.25 in

Shaft Backing Shoulder Dia. - Backface (db)

 N/A 113 mm4.45 in

Housing Backing Shoulder Dia. - Frontface (Da)

 N/A 160.00 mm6.30 in

Housing Backing Shoulder Dia. - Backface (Db)

 N/A 154.94 mm6.10 in

Cage Location rel. to BF (Aa)

 N/A 2.5 mm0.1 in

Cage Location rel. to FF (Ab)

 N/A 6.1 mm0.24 in

Ratings

Dynamic Axial Rating - 90M Revs (Ca90)9 N/A 49500 N11100 lbf

Static Radial Load Rating (C0)

 N/A 327000 N73400 lbf

Factors

G1 Factor

 N/A 127.7

G2 Factor

 N/A 36.9
Geometry Factor (Cg)10 N/A 0.0898
  • 1 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
  • 2 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
  • 3 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 4 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 5 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 6 Negative value indicates effective center inside cone backface.
  • 7 These maximum fillet radii will be cleared by the bearing corners.
  • 8 These maximum fillet radii will be cleared by the bearing corners.
  • 9 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
  • 10 Geometry constant for Lubrication Life Adjustment Factor a3l.