Activated later
Unit of Measure

Key Dimensions

UPC

 N/A 0013992342041

Cone Part Number

 N/A X33021G

Cup Part Number

 N/A Y33021G

Bore (d)

 N/A 105 mm4.1339 in

O.D. (D)

 N/A 160 mm6.2992 in

Width (T)

 N/A 43.000 mm1.6929 in
Dynamic Radial Load Rating - 1M Revs (C1) 1 N/A 291000 N65400 lbf
Dynamic Radial Load Rating - 90M Revs (C90) 2 N/A 75400 N17000 lbf
e Factor 3 N/A 0.28
K Factor 4 N/A 2.07
Y Factor 5 N/A 2.12

Other Dimensions

Weight

 N/A 3.0 Kg6.5 lb

Inner Ring Width (B)

 N/A 43 mm1.6929 in

Outer Ring Width (C)

 N/A 34.000 mm1.3386 in
Effective Center Location6 N/A -12.2 mm-0.48 in
Max Shaft Fillet Radius7 N/A 2.540 mm0.100 in
Max Housing Fillet Radius8 N/A 2.03 mm0.08 in

Shaft Backing Shoulder Dia. - Frontface (da)

 N/A 113 mm4.45 in

Shaft Backing Shoulder Dia. - Backface (db)

 N/A 118 mm4.65 in

Housing Backing Shoulder Dia. - Frontface (Da)

 N/A 153.16 mm6.03 in

Housing Backing Shoulder Dia. - Backface (Db)

 N/A 147.07 mm5.79 in

Cage Location rel. to BF (Aa)

 N/A 2.5 mm0.1 in

Cage Location rel. to FF (Ab)

 N/A 3.8 mm0.15 in

Ratings

Dynamic Axial Rating - 90M Revs (Ca90)9 N/A 36500 N8200 lbf

Static Radial Load Rating (C0)

 N/A 449000 N101000 lbf

Factors

G1 Factor

 N/A 236.3

G2 Factor

 N/A 54.8
Geometry Factor (Cg)10 N/A 0.0975
  • 1 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
  • 2 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
  • 3 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 4 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 5 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 6 Negative value indicates effective center inside cone backface.
  • 7 These maximum fillet radii will be cleared by the bearing corners.
  • 8 These maximum fillet radii will be cleared by the bearing corners.
  • 9 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
  • 10 Geometry constant for Lubrication Life Adjustment Factor a3l.