Montage of Timken Bearing Products
Batch CAD Cart (0) ▾
  • Cart is empty
  1. Click Here for Batch Download
Request Information Add to CAD Cart
Tapered Roller Bearings - TSL (DUO-FACE® Plus Seal) Imperial
Unit of Measure

Specifications

Series

 N/A 13600

Cone Part Number

 N/A 13685

Cup Part Number

 N/A 13621

Seal Part Number

 N/A 13600LA

Design Unit

 N/A Inch

Cage Material

 N/A Stamped Steel

Dimensions

d - Bore

 N/A 1 1/2 in38.1 mm

D - Cup Outer Diameter

 N/A 2.7170 in69.012 mm

B - Cone Width

 N/A 0.7500 in19.050 mm

C - Cup Width

 N/A 0.5938 in15.083 mm

T - Bearing Width

 N/A 0.75 in19.05 mm

T1 - Total Width

 N/A 0.825 in20.96 mm

Abutment and Fillet Dimensions

R - Cone Backface "To Clear" Radius1 N/A 0.14 in3.600 mm
r - Cup Backface "To Clear" Radius2 N/A 0.090 in2.29 mm

da - Cone Frontface Backing Diameter

 N/A 1.75 in44.5 mm

db - Cone Backface Backing Diameter

 N/A 2.01 in51 mm

Da - Cup Frontface Backing Diameter

 N/A 2.60 in66.00 mm

Db - Cup Backface Backing Diameter

 N/A 2.40 in60.96 mm

Ab - Cage-Cone Frontface Clearance

 N/A 0.05 in1.3 mm

Aa - Cage-Cone Backface Clearance

 N/A 0.02 in0.5 mm
a - Effective Center Location3 N/A -0.12 in-3 mm

Basic Load Ratings

C90 - Dynamic Radial Rating (90 million revolutions)4 N/A 3920 lbf17400 N
C1 - Dynamic Radial Rating (1 million revolutions)5 N/A 15100 lbf67200 N

C0 - Static Radial Rating

 N/A 15300 lbf67900 N
Ca90 - Dynamic Thrust Rating (90 million revolutions)6 N/A 2700 lbf12000 N

Factors

K - Factor7 N/A 1.45
e - ISO Factor8 N/A 0.4
Y - ISO Factor9 N/A 1.49
Y1 - ISO Factor10 N/A 1.68
Y2 - ISO Factor11 N/A 2.5

G1 - Heat Generation Factor (Roller-Raceway)

 N/A 20.7

G2 - Heat Generation Factor (Rib-Roller End)

 N/A 10.9
Cg - Geometry Factor12 N/A 0.0713
  • 1 These maximum fillet radii will be cleared by the bearing corners.
  • 2 These maximum fillet radii will be cleared by the bearing corners.
  • 3 Negative value indicates effective center inside cone backface.
  • 4 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
  • 5 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
  • 6 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
  • 7 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 8 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 9 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 10 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 11 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 12 Geometry constant for Lubrication Life Adjustment Factor a3l.