Menu
Batch CAD Cart (0) ▾
  • Cart is empty
  1. Click Here for Batch Download
Request Information Add to CAD Cart

●   UCFL two-bolt flanged units are suggested for industrial applications where normal loads are encountered.
●   This series is primarily designed for applications where the mounting area is restricted.
●   Each unit comes assembled and ready for mounting, using bolts through the flange.
●   These units use wide inner ring ball bearings with self-aligning spherical outside diameters that compensate for shaft misalignment.
●   Timken UCFL series Mounted Bearings feature the Timken set screw locking (UC) bearing insert.
●   Bearing prelubricated and ready for immediate installation.
●   Grease fitting supplied for relubrication.
●   The bonded seal design is well-suited for applications involving wet or dirty environments.
●   Bolt-hole spacing dimensions and shaft center location are interchangeable with competitive units.
Unit of Measure

Specifications

Bore Size

 N/A 15/16 in

Seal Type

 N/A IP69K Seal

Housing Material

 N/A Machined Stainless Steel

Bearing Number

 N/A SUC205-15-IP69K/FVSL613

Lubrication Type

 N/A Food Grade Solid Lube

Locking Style

 N/A Set Screw Locking

Housing Construction

 N/A Two-Bolt Flange

Dimensions

Total Length H

 N/A 4.890 in124.2 mm

Total Height L

 N/A 2.661 in67.6 mm

Total Width A0

 N/A 1.414 in35.9 mm

Bolt Hole Spacing J

 N/A 3.890 in98.8 mm

Housing Width A

 N/A 0.969 in24.6 mm

Bolt Hole Size N

 N/A 0.469 in11.9 mm

Center of Bearing from Housing End A2

 N/A 0.634 in16.1 mm

Center of Bearing from Bearing End S

 N/A 0.563 in14.3 mm

Inner Ring Width B

 N/A 1.343 in34.1 mm

Basic Load Ratings

Dynamic Load Rating

 N/A 2676 lbf11900 N

Static Load Rating

 N/A 1417 lbf6300 N
By clicking Submit, you consent to the personal information you provide being used in the manner as described in our Privacy Notice, including access to that information by Timken personnel who may be located outside your home country. In addition, you agree that the CAD drawings are for your personal, one-time use only, and that you will not modify or create any compilation or derivative work using the CAD drawings or distribute or display the CAD drawings on any website or other media.