Menu
Batch CAD Cart (0) ▾
  • Cart is empty
  1. Click Here for Batch Download
Request Information Add to CAD Cart

●   UCFL two-bolt flanged units are suggested for industrial applications where normal loads are encountered.
●   This series is primarily designed for applications where the mounting area is restricted.
●   Each unit comes assembled and ready for mounting, using bolts through the flange.
●   These units use wide inner ring ball bearings with self-aligning spherical outside diameters that compensate for shaft misalignment.
●   Timken UCFL series Mounted Bearings feature the Timken set screw locking (UC) bearing insert.
●   Bearing prelubricated and ready for immediate installation.
●   Grease fitting supplied for relubrication.
●   The bonded seal design is well-suited for applications involving wet or dirty environments.
●   Bolt-hole spacing dimensions and shaft center location are interchangeable with competitive units.
Unit of Measure

Specifications

Bore Size

 N/A 1 7/16 in

Seal Type

 N/A IP69K Seal

Housing Material

 N/A White Thermoplastic (Polymer)

Bearing Number

 N/A SUC207-23-IP69K/F

Lubrication Type

 N/A Standard Food Safe Grease

Locking Style

 N/A Set Screw Locking

Housing Construction

 N/A Two-Bolt Flange

Bearing Style

 N/A Ball Bearing

Dimensions

Total Length H

 N/A 6.457 in164.0 mm

Total Height L

 N/A 3.543 in90.0 mm

Total Width A0

 N/A 1.748 in44.4 mm

Bolt Hole Spacing J

 N/A 5.118 in130.0 mm

Housing Width A

 N/A 1.287 in32.7 mm

Bolt Hole Size N

 N/A 0.512 in13.0 mm

Center of Bearing from Housing End A2

 N/A 0.748 in19.0 mm

Center of Bearing from Bearing End S

 N/A 0.689 in17.5 mm

Inner Ring Width B

 N/A 1.689 in42.9 mm

Basic Load Ratings

Dynamic Load Rating

 N/A 4901 lbf21800 N

Static Load Rating

 N/A 2766 lbf12300 N
By clicking Submit, you consent to the personal information you provide being used in the manner as described in our Privacy Notice, including access to that information by Timken personnel who may be located outside your home country. In addition, you agree that the CAD drawings are for your personal, one-time use only, and that you will not modify or create any compilation or derivative work using the CAD drawings or distribute or display the CAD drawings on any website or other media.