Part Number ATB-16ET, Aurora Bearing ATM-ET & ATB-ET Male Rod Ends SAE Series AS8135/8 (Right Hand) & AS81935/8 (Left Hand) On The Timken Company

Body - PH 13-8 Mo stainless steel per AMS 5629 - heat treated.
Ball - 440C stainless steel per AMS 5630 - heat treated.
Optional Ball - 13-8 Mo stainless steel per AMS 5629 - heat treated. (Specify by adding suffix "C" ex.: ATM-3ETC)
Race - 17-4 PH stainless steel per AMS 5643 - heat treated.
PTFE Liner - (AT 3200) Permanently bonded to race inside diameter, qualified to SAE-AS81820 Type A.
Temperature range: -65°F to +325°F
No load rotational breakaway torque can be varied to meet specific application requirements.
Keyways are available. Units are supplied without keyways. When a keyway is required, specify by adding suffix "K". Ex.: ATMK-3T.
As applicable, keyways will conform to SAE-AS81935/3 or NAS 559.
All threads are rolled after heat treatment, and conform to UNJF-3A per AS8879.
Rod End Bearings listed are manufactured to conform to the dimensions, materials, and configurations of SAE-AS81935/8, and are approved for procurement under this specification.

Unit of Measure

Part Number	N/A ATB-16ET
SAE Part Number	N/A M81935/8-16L
Thread Type	N/A Left Hand
Thread Configuration	N/A Male
B - Ball Bore	N/A 1.0000 in
W - Ball Width	N/A 1.000 in
H - Head Width	N/A .807 in
A - Base to Center	N/A 3.968 in
D - Head Diameter	N/A 2.681 in
O - Ball Shoulder Diameter	N/A 1.118 in
S - Max. Housing I.D.	N/A 1.7500 in
Ball Diameter	N/A 1.500 in
C - Thread Length	N/A 2.100 in
Thread Size	N/A 1-12
Thread Class	N/A UNJF-3A-LH
a - Misalignment Angle	N/A 9 º
Approximate Brg. Weight	N/A 1.725 lb
Ultimate Radial Static Load Capacity	N/A 101,400 lb
Fatique Load	N/A 28,600 lb
Axial Proof Load	N/A 3,570 lb
No Load Rotational Breakaway Torque	N/A 1 to 24 in·lb
Note	N/A For dimensional tolerances of listed features, see the PDF version of the catalog under the "View Product Catalogs" tab from the home page.

Part Number