CAD (0) ▾
  • Cart is empty
  1. Request CAD files

CAD Drawings

Request Information Search by Specification
  • CM-M & CB-M Image

    Aurora Bearing CM-M & CB-M Series Male Rod Ends - Metric - General Purpose - Economy

    (44)

    • Body - Low carbon steel - protective coated for corrosion resistance.
    • Ball - Alloy steel - heat treated - hard chrome plated.
    • Grease Fittings available for sizes -M10 and up. Units are supplied without grease fittings. When a grease fitting is required, specify by adding suffix "Z" or "F". Ex.: CM-M10Z = Zerk Type Fitting CM-M10F = Flush Type Fitting.
    • Load ratings apply only to rod ends without grease fittings. For load ratings with fittings, please consult our engineering department.
    • Indentation on bottom of shank identifies metric thread.

  • CW-M & CG-M Image

    Aurora Bearing CW-M & CG-M Series Female Rod Ends - Metric - General Purpose - Economy

    (52)

    • Body - Low carbon steel - protective coated for corrosion resistance.
    • Ball - Alloy steel - heat treated - hard chrome plated.
    • Left-hand threaded units have an identification groove near end of shank.
    • Groove near middle of shank identifies metric thread.
    • Grease Fittings available for sizes -M6 and up. Units are supplied without grease fittings. When a grease fitting is required, specify by adding suffix "Z" or "F". Ex.: CW-M6Z = Zerk Type Fitting CW-M6F = Flush Type Fitting.
    • Load ratings apply only to rod ends without grease fittings. For load ratings with fittings, please consult our engineering department.

  • MM-M & MB-M Image

    Aurora Bearing MM-M & MB-M Series Male Rod Ends - Metric - General Purpose - Precision

    (110)

    • Body - Low carbon steel - protective coated for corrosion resistance.
    • Ball - Alloy steel - heat treated, hard chrome plated.
    • Race - Low carbon steel - protective coated for corrosion resistance.
    • Grease Fittings available for sizes -M5 and up. Units are supplied without grease fittings. When a grease fitting is required, specify by adding suffix "Z" or "F". Ex.: MM-M5Z = Zerk Type Fitting MM-M5F = Flush Type Fitting.
    • Load ratings apply only to rod ends without grease fittings. For load ratings with fittings, please consult our engineering department.
    • Indentation on bottom of shank identifies metric thread.
    • PTFE Liners available upon request. Specify by adding suffix "T". Ex.: MM-M5T.

  • MW-M & MG-M Image

    Aurora Bearing MW-M & MG-M Series Female Rod Ends - Metric - General Purpose - Precision

    (110)

    • Body - Low carbon steel - protective coated for corrosion resistance.
    • Ball - Alloy steel - heat treated - hard chrome plated.
    • Race - Low carbon steel - protective coated for corrosion resistance.
    • Left-hand threaded units have an identification groove near end of shank.
    • Groove near middle of shank identifies metric thread.
    • Grease Fittings available for sizes -M5 and up. Units are supplied without grease fittings. When a grease fitting is required, specify by adding suffix "Z" or "F". Ex.: MW-M5Z = Zerk Type Fitting MW-M5F = Flush Type Fitting.
    • Load ratings apply only to rod ends without grease fittings. For load ratings with fittings, please consult our engineering department.
    • PTFE Liners available upon request. Specify by adding suffix "T". Ex.: MW-M5T.

  • MM-MT & MB-MT Image

    Aurora Bearing MM-MT & MB-MT Series Male Rod Ends (PTFE) Lined - Metric - General Purpose - Precision - Self-Lubricating

    (38)

    • Body - Low carbon steel - protective coated for corrosion resistance.
    • Ball - Alloy steel - heat treated, hard chrome plated.
    • Race - Low carbon steel - protective coated for corrosion resistance - PTFE Lined.
    • Indentation on bottom of shank identifies metric thread.

  • MW-MT & MG-MT Image

    Aurora Bearing MW-MT & MG-MT Series Female Rod Ends (PTFE) Lined - Metric - General Purpose - Precision - Self-Lubricating

    (38)

    • Body - Low carbon steel - protective coated for corrosion resistance.
    • Ball - Alloy steel - heat treated - hard chrome plated.
    • Race - Low carbon steel - protective coated for corrosion resistance - PTFE Lined.
    • Left-hand threaded units have an identification groove near end of shank.
    • Groove near middle of shank identifies metric thread.

  • KM-M & KB-M Image

    Aurora Bearing KM-M & KB-M Series Male Rod Ends - Metric - Wear Resistant - Precision

    (110)

    • Body - Low carbon steel - protective coated for corrosion resistance.
    • Ball - Alloy steel, heat treated - hard chrome plated.
    • Race - Alloy steel - heat treated - protective coated for corrosion resistance.
    • Grease Fittings available for sizes -M5 and up. Units are supplied without grease fittings. When a grease fitting is required, specify by adding suffix "Z" or "F". Ex.: KM-M5Z = Zerk Type Fitting KM-M5F = Flush Type Fitting.
    • Load ratings apply only to rod ends without grease fittings. For load ratings with fittings, please consult our engineering department.
    • Indentation on bottom of shank identifies metric thread.

  • KW-M & KG-M Image

    Aurora Bearing KW-M & KG-M Series Female Rod Ends - Metric - Wear Resistant - Precision

    (110)

    • Body - Low carbon steel - protective coated for corrosion resistance.
    • Ball - Alloy steel - heat treated - hard chrome plated.
    • Race - Alloy steel - heat treated - protective coated for corrosion resistance.
    • Left-hand threaded units have an identification groove near end of shank.
    • Groove near middle of shank identifies metric thread.
    • Grease Fittings available for sizes -M5 and up. Units are supplied without grease fittings. When a grease fitting is required, specify by adding suffix "Z" or "F". Ex.: KW-M5Z = Zerk Type Fitting KW-M5F = Flush Type Fitting.
    • Load ratings apply only to rod ends without grease fittings. For load ratings with fittings, please consult our engineering department.

  • AM-M & AB-M Image

    Aurora Bearing AM-M & AB-M Series Male Rod Ends - Metric - High Strength Alloy - Precision - (PTFE Liners Available)

    (110)

    • Body - Alloy steel - heat treated - protective coated for corrosion resistance.
    • Ball - Alloy steel - heat treated - hard chrome plated.
    • Race - Alloy steel - heat treated - protective coated for corrosion resistance.
    • Grease Fittings available for sizes -M5 and up. Units are supplied without grease fittings. When a grease fitting is required, specify by adding suffix "Z" or "F". Ex.: AM-M5Z = Zerk Type Fitting AM-M5F = Flush Type Fitting.
    • Load ratings apply only to rod ends without grease fittings. For load ratings with fittings, please consult our engineering department.
    • Indentation on bottom of shank identifies metric thread.
    • PTFE Liners available upon request. Specify by adding suffix "T". Ex.: AM-M5T.

  • AW-M & AG-M Image

    Aurora Bearing AW-M & AG-M Series Female Rod Ends - Metric - High Strength Alloy - Precision - (PTFE Liners Available)

    (110)

    • Body - Alloy steel - heat treated - protective coated for corrosion resistance.
    • Ball - Alloy steel - heat treated - hard chrome plated.
    • Race - Alloy steel - heat treated - protective coated for corrosion resistance.
    • Left-hand threaded units have an identification groove near end of shank.
    • Groove near middle of shank identifies metric thread.
    • Grease Fittings available for sizes -M5 and up. Units are supplied without grease fittings. When a grease fitting is required, specify by adding suffix "Z" or "F". Ex.: AW-M5Z = Zerk Type Fitting AW-M5F = Flush Type Fitting.
    • Load ratings apply only to rod ends without grease fittings. For load ratings with fittings, please consult our engineering department.
    • PTFE Liners available upon request. Specify by adding suffix "T". Ex.: AW-M5T.

  • MM-MT & MB-MT Image

    Aurora Bearing AM-MT & AB-MT Series Male Rod Ends (PTFE) Lined - Metric - High Strength Alloy - Precision - Self-Lubricating

    (38)

    • Body -Alloy steel - heat treated - protective coated for corrosion resistance.
    • Ball - Alloy steel - heat treated, hard chrome plated.
    • Race -Alloy steel - heat treated - protective coated for corrosion resistance - PTFE Lined.
    • Indentation on bottom of shank identifies metric thread.

  • MW-MT & MG-MT Image

    Aurora Bearing AW-MT & AG-MT Series Female Rod Ends (PTFE) Lined - Metric - High Strength Alloy - Precision - Self-Lubricating

    (38)

    • Body -Alloy steel - heat treatedl - protective coated for corrosion resistance.
    • Ball - Alloy steel - heat treated - hard chrome plated.
    • Race - Alloy steel - heat treated - protective coated for corrosion resistance - PTFE Lined.
    • Left-hand threaded units have an identification groove near end of shank.
    • Groove near middle of shank identifies metric thread.