CAD (0) ▾
  • Cart is empty
  1. Request CAD files

Key Features

  • Available in single, double and multi-row configurations, as well as proprietary sizes
  • Designed in collaboration with OE engineers to design, engineer and test bearings for premium performance in many applications
  • Power dense designs allow for heavier loads and can help extend bearing life
  • Optimized internal geometry lowers torque and operating temperatures to extend lubrication system life
  • Can be designed to withstand high-corrosive, high-temperature and vacuum or low-lubrication environments with proprietary enhancements
Request Information
Unit of Measure

Key Dimensions

Cone Part Number

 N/A 55206C

Cup Part Number

 N/A 55437-B

Bore (d)

 N/A 2.0625 in52.388 mm

O.D. (D)

 N/A 4.375 in111.125 mm

Width (T)

 N/A 0.5938 in15.083 mm
Dynamic Radial Load Rating - 1M Revs (C1) 1 N/A 34000 lbf151000 N
Dynamic Radial Load Rating - 90M Revs (C90) 2 N/A 8810 lbf39200 N
e Factor3 N/A 0.88
K Factor 4 N/A 0.66

Series

 N/A 55000C
Y Factor 5 N/A 0.68

Other Dimensions

Inner Ring Width (B)

 N/A 1.0594 in26.909 mm

Outer Ring Width (C)

 N/A 0.8125 in20.638 mm

Outer Ring Flange O.D.(D1)

 N/A 4.5938 in116.683 mm

Outer Ring Flange Width (C2)

 N/A 0.2188 in5.558 mm
Effective Center Location6 N/A 0.3 in7.6 mm
Max Shaft Fillet Radius7 N/A 0.14 in3.6 mm

Shaft Backing Shoulder Diameter - Frontface (da)

 N/A 2.54 in64.4 mm

Shaft Backing Shoulder Diameter - Backface (db)

 N/A 2.83 in72 mm

Housing Backing Shoulder Diameter - Frontface (Da)

 N/A 4.25 in106.93 mm
Max Housing Fillet Radius8 N/A 0.13 in3.3 mm

Cage Location Relative to Frontface (Ab) 

 N/A 0.16 in4.1 mm

Cage Location Relative to Backface (Aa)

 N/A 0.17 in4.3 mm

Weight

 N/A 3 lb1.3 Kg

Ratings

Dynamic Axial Rating - 90M Revs (Ca90)9 N/A 13300 lbf59300 N

Static Radial Load Rating (C0)

 N/A 36200 lbf161000 N

Factors

G1 Factor

 N/A 48.7

G2 Factor

 N/A 18.1
Geometry Factor (Cg) 10 N/A 0.120
  • 1 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
  • 2 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
  • 3 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 4 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 5 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 6 Negative value indicates effective center inside cone backface.
  • 7 These maximum fillet radii will be cleared by the bearing corners.
  • 8 These maximum fillet radii will be cleared by the bearing corners.
  • 9 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
  • 10 Geometry constant for Lubrication Life Adjustment Factor a3l.