CAD (0) ▾
  • Cart is empty
  1. Request CAD files

Key Features

  • Available in single, double and multi-row configurations, as well as proprietary sizes
  • Designed in collaboration with OE engineers to design, engineer and test bearings for premium performance in many applications
  • Power dense designs allow for heavier loads and can help extend bearing life
  • Optimized internal geometry lowers torque and operating temperatures to extend lubrication system life
  • Can be designed to withstand high-corrosive, high-temperature and vacuum or low-lubrication environments with proprietary enhancements
Request Information
Unit of Measure

Key Dimensions

Cone Part Number

 N/A HH221447

Cup Part Number

 N/A HH221410-B

Bore (d)

 N/A 3.9363 in99.982 mm

O.D. (D)

 N/A 7.5 in190.5 mm

Width (T)

 N/A 0.875 in22.225 mm
Dynamic Radial Load Rating - 1M Revs (C1) 1 N/A 120000 lbf534000 N
Dynamic Radial Load Rating - 90M Revs (C90) 2 N/A 31100 lbf138000 N
e Factor3 N/A 0.33
K Factor 4 N/A 1.74

Series

 N/A HH221400
Y Factor 5 N/A 1.79

Other Dimensions

Inner Ring Width (B)

 N/A 2.265 in57.531 mm

Outer Ring Width (C)

 N/A 1.8125 in46.038 mm

Outer Ring Flange O.D.(D1)

 N/A 7.8710 in199.923 mm

Outer Ring Flange Width (C2)

 N/A 0.4375 in11.113 mm
Effective Center Location6 N/A -0.59 in-15 mm
Max Shaft Fillet Radius7 N/A 0.25 in6.4 mm

Shaft Backing Shoulder Diameter - Frontface (da)

 N/A 4.49 in114 mm

Shaft Backing Shoulder Diameter - Backface (db)

 N/A 4.96 in126 mm

Housing Backing Shoulder Diameter - Frontface (Da)

 N/A 7.06 in179.32 mm
Max Housing Fillet Radius8 N/A 0.13 in3.3 mm

Cage Location Relative to Frontface (Ab) 

 N/A 0.16 in4.1 mm

Cage Location Relative to Backface (Aa)

 N/A 0.08 in2 mm

Weight

 N/A 16.1 lb7.3 Kg

Ratings

Dynamic Axial Rating - 90M Revs (Ca90)9 N/A 17800 lbf79300 N

Static Radial Load Rating (C0)

 N/A 156000 lbf692000 N

Factors

G1 Factor

 N/A 265.6

G2 Factor

 N/A 28.4
Geometry Factor (Cg) 10 N/A 0.107
  • 1 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
  • 2 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
  • 3 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 4 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 5 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 6 Negative value indicates effective center inside cone backface.
  • 7 These maximum fillet radii will be cleared by the bearing corners.
  • 8 These maximum fillet radii will be cleared by the bearing corners.
  • 9 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
  • 10 Geometry constant for Lubrication Life Adjustment Factor a3l.