CAD (0)
▾
Pillow blocks, the most commonly used type of mounted units, provide shaft support where the mounting surface is parallel to the shaft axis. The bolt holes are usually slotted for easy adjustment during mounting.
Pillow blocks come in a variety of configurations.
- Narrow series (V and S) are lightweight, yet structurally designed to support bearing load.
- Premium width series (R and Y) are three times stronger for rougher environments. They’re available in two styles that fit typical applications.
- Pressed steel and rubber pillow blocks are available for light-duty applications.
Unit of Measure
Key Dimensions
Shaft Size d |
N/A 0.9375 in |
Bearing Type |
N/A Ball Bearing |
Bearing Number |
N/A 1015KR |
Housing Construction |
N/A Four-Bolt Double Pillow Block |
Full Timken Part Number |
N/A DRNR 15⁄16 |
Other Dimensions
Base Width A |
N/A 108 mm4.25 in |
Base to Center Height H |
N/A 63.5 mm2.5 in |
Foot Height H1 |
N/A 19 mm0.75 in |
Total Height H2 |
N/A 99.2 mm3.91 in |
Total Length L |
N/A 196.8 mm7 3/4 in |
Dimension L1 |
N/A 71.4 mm2.813 in |
Bolt Hole Spacing J |
N/A 158.8 mm6.25 in |
Bolt Hole Spacing [Lateral] J1 |
N/A 69.8 mm2.75 in |
Bolt Hole Width N |
N/A 12.7 mm0.500 in |
Bolt Hole Length N1 |
N/A 15.9 mm0.625 in |
Total Width O |
N/A 200 mm7.8750 in |
Dimension P |
N/A 146 mm5.75 in |
Dimension d1 |
N/A 38.1 mm1.5 in |
