The Timken Company
The Timken Company
4500 Mt Pleasant St. NW
N. Canton, OH 44720
Phone: (234) 262-3000
E-Mail: CustomerCAD@timken.com • Web site: www.timken.com
Print Back
Like the TS bearing design, the TSF design consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft. TSF bearings have flanged cups to facilitate axial location and accurately align seals in through-bored housings.

RELATED PRODUCTS

Unit of Measure

Key Dimensions

Cup Part Number

 N/A 08231-B

O.D. (D)

 N/A 2.3125 in58.738 mm

Outer Ring Width (C)

 N/A 0.4219 in10.716 mm
e Factor 1 N/A 0.47
K Factor 2 N/A 1.23
Y Factor 3 N/A 1.27

Other Dimensions

Weight

 N/A 0.3 Kg0.7 lb

Outer Ring Flange O.D.(D1)

 N/A 2.4645 in62.598 mm

Outer Ring Flange Width (C2)

 N/A 0.1090 in2.769 mm
Max Housing Fillet Radius4 N/A 0.04 in1.0 mm

Housing Backing Shoulder Dia. - Frontface (Da)

 N/A 2.26 in57.40 mm

Factors

G1 Factor

 N/A 1.07

G2 Factor

 N/A 1.07
Geometry Factor (Cg)5 N/A 0.0601
  • 1 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 2 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 3 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 4 These maximum fillet radii will be cleared by the bearing corners.
  • 5 Geometry constant for Lubrication Life Adjustment Factor a3l.