The Timken Company
The Timken Company
4500 Mt Pleasant St. NW
N. Canton, OH 44720
Phone: (234) 262-3000
E-Mail: CustomerCAD@timken.com • Web site: www.timken.com
Print Back
Like the TS bearing design, the TSF design consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft. TSF bearings have flanged cups to facilitate axial location and accurately align seals in through-bored housings.
Unit of Measure

Key Dimensions

Cup Part Number

 N/A 47623AB

O.D. (D)

 N/A 5.3750 in136.525 mm

Outer Ring Width (C)

 N/A 1.5000 in38.100 mm
e Factor 1 N/A 0.4
K Factor 2 N/A 1.44
Y Factor 3 N/A 1.48

Other Dimensions

Weight

 N/A 2.6 Kg5.8 lb

Outer Ring Flange O.D.(D1)

 N/A 5.6870 in144.450 mm

Outer Ring Flange Width (C2)

 N/A 0.25 in6.35 mm
Max Housing Fillet Radius4 N/A 0.03 in0.8 mm

Housing Backing Shoulder Dia. - Frontface (Da)

 N/A 5.16 in130.05 mm

Factors

G1 Factor

 N/A 1750

G2 Factor

 N/A 301
Geometry Factor (Cg)5 N/A 0.127
  • 1 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 2 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 3 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 4 These maximum fillet radii will be cleared by the bearing corners.
  • 5 Geometry constant for Lubrication Life Adjustment Factor a3l.