Aurora Bearing MW-M & MG-M Series Female Rod Ends - Metric - General Purpose

Batch CAD Cart (0) ▾

Body - Low carbon steel - protective coated for corrosion resistance.
Ball - Alloy steel - heat treated - hard chrome plated.
Race - Low carbon steel - protective coated for corrosion resistance.
Left-hand threaded units have an identification groove near end of shank.
Groove near middle of shank identifies metric thread.
Grease Fittings available for sizes -M5 and up. Units are supplied without grease fittings. When a grease fitting is required, specify by adding suffix "Z" or "F". Ex.: MW-M5Z = Zerk Type Fitting MW-M5F = Flush Type Fitting.
Load ratings apply only to rod ends without grease fittings. For load ratings with fittings, please consult our engineering department.
PTFE Liners available upon request. Specify by adding suffix "T". Ex.: MW-M5T.

1 - 25 of 110 | Results Per Page | View | Unit of Measure

1 2 3 4 5

Request Information Compare Items Add to CAD Cart

Clear Filter

Thread Type

B - Ball Bore (mm)

Thread Size

Ultimate Radial Static Load Capacity

Part Number	Thread Type	B - Ball Bore	W - Ball Width	H - Head Width	A - Base to Center	D - Head Diameter	C - Thread Depth [mm]	Thread Size	Ultimate Radial Static Load Capacity	CAD

MW-M3	N/A Right Hand	N/A 3.000 mm	N/A 6.00 mm	N/A 4.75 mm	N/A 21.00 mm	N/A 12.50 mm	N/A 10.00 mm	N/A M3 x 0.5	N/A 4,972 N	N/A
MG-M3	N/A Left Hand	N/A 3.000 mm	N/A 6.00 mm	N/A 4.75 mm	N/A 21.00 mm	N/A 12.50 mm	N/A 10.00 mm	N/A M3 x 0.5	N/A 4,972 N	N/A
MW-M5	N/A Right Hand	N/A 5.000 mm	N/A 8.00 mm	N/A 6.25 mm	N/A 27.00 mm	N/A 16.00 mm	N/A 14.00 mm	N/A M5 x 0.8	N/A 7,090 N	N/A
MG-M5	N/A Left Hand	N/A 5.000 mm	N/A 8.00 mm	N/A 6.25 mm	N/A 27.00 mm	N/A 16.00 mm	N/A 14.00 mm	N/A M5 x 0.8	N/A 7,090 N	N/A
MW-M5F	N/A Right Hand	N/A 5.000 mm	N/A 8.00 mm	N/A 6.25 mm	N/A 27.00 mm	N/A 16.00 mm	N/A 14.00 mm	N/A M5 x 0.8	N/A Consult Engineering Department	N/A
MG-M5F	N/A Left Hand	N/A 5.000 mm	N/A 8.00 mm	N/A 6.25 mm	N/A 27.00 mm	N/A 16.00 mm	N/A 14.00 mm	N/A M5 x 0.8	N/A Consult Engineering Department	N/A
MW-M5Z	N/A Right Hand	N/A 5.000 mm	N/A 8.00 mm	N/A 6.25 mm	N/A 27.00 mm	N/A 16.00 mm	N/A 14.00 mm	N/A M5 x 0.8	N/A Consult Engineering Department	N/A
MG-M5Z	N/A Left Hand	N/A 5.000 mm	N/A 8.00 mm	N/A 6.25 mm	N/A 27.00 mm	N/A 16.00 mm	N/A 14.00 mm	N/A M5 x 0.8	N/A Consult Engineering Department	N/A
MW-M6	N/A Right Hand	N/A 6.000 mm	N/A 9.00 mm	N/A 7.00 mm	N/A 30.00 mm	N/A 19.00 mm	N/A 14.00 mm	N/A M6 x 1.0	N/A 10,573 N	N/A
MG-M6	N/A Left Hand	N/A 6.000 mm	N/A 9.00 mm	N/A 7.00 mm	N/A 30.00 mm	N/A 19.00 mm	N/A 14.00 mm	N/A M6 x 1.0	N/A 10,573 N	N/A
MW-M6F	N/A Right Hand	N/A 6.000 mm	N/A 9.00 mm	N/A 7.00 mm	N/A 30.00 mm	N/A 19.00 mm	N/A 14.00 mm	N/A M6 x 1.0	N/A Consult Engineering Department	N/A
MG-M6F	N/A Left Hand	N/A 6.000 mm	N/A 9.00 mm	N/A 7.00 mm	N/A 30.00 mm	N/A 19.00 mm	N/A 14.00 mm	N/A M6 x 1.0	N/A Consult Engineering Department	N/A
MW-M6Z	N/A Right Hand	N/A 6.000 mm	N/A 9.00 mm	N/A 7.00 mm	N/A 30.00 mm	N/A 19.00 mm	N/A 14.00 mm	N/A M6 x 1.0	N/A Consult Engineering Department	N/A
MG-M6Z	N/A Left Hand	N/A 6.000 mm	N/A 9.00 mm	N/A 7.00 mm	N/A 30.00 mm	N/A 19.00 mm	N/A 14.00 mm	N/A M6 x 1.0	N/A Consult Engineering Department	N/A
MWF-M8	N/A Right Hand	N/A 8.000 mm	N/A 12.00 mm	N/A 8.75 mm	N/A 36.00 mm	N/A 22.25 mm	N/A 17.00 mm	N/A M8 x 1.0	N/A 14,072 N	N/A
MGF-M8	N/A Left Hand	N/A 8.000 mm	N/A 12.00 mm	N/A 8.75 mm	N/A 36.00 mm	N/A 22.25 mm	N/A 17.00 mm	N/A M8 x 1.0	N/A 14,072 N	N/A
MWF-M8F	N/A Right Hand	N/A 8.000 mm	N/A 12.00 mm	N/A 8.75 mm	N/A 36.00 mm	N/A 22.25 mm	N/A 17.00 mm	N/A M8 x 1.0	N/A Consult Engineering Department	N/A
MGF-M8F	N/A Left Hand	N/A 8.000 mm	N/A 12.00 mm	N/A 8.75 mm	N/A 36.00 mm	N/A 22.25 mm	N/A 17.00 mm	N/A M8 x 1.0	N/A Consult Engineering Department	N/A
MWF-M8Z	N/A Right Hand	N/A 8.000 mm	N/A 12.00 mm	N/A 8.75 mm	N/A 36.00 mm	N/A 22.25 mm	N/A 17.00 mm	N/A M8 x 1.0	N/A Consult Engineering Department	N/A
MGF-M8Z	N/A Left Hand	N/A 8.000 mm	N/A 12.00 mm	N/A 8.75 mm	N/A 36.00 mm	N/A 22.25 mm	N/A 17.00 mm	N/A M8 x 1.0	N/A Consult Engineering Department	N/A
MW-M8	N/A Right Hand	N/A 8.000 mm	N/A 12.00 mm	N/A 8.75 mm	N/A 36.00 mm	N/A 22.25 mm	N/A 17.00 mm	N/A M8 x 1.25	N/A 14,072 N	N/A
MG-M8	N/A Left Hand	N/A 8.000 mm	N/A 12.00 mm	N/A 8.75 mm	N/A 36.00 mm	N/A 22.25 mm	N/A 17.00 mm	N/A M8 x 1.25	N/A 14,072 N	N/A
MW-M8F	N/A Right Hand	N/A 8.000 mm	N/A 12.00 mm	N/A 8.75 mm	N/A 36.00 mm	N/A 22.25 mm	N/A 17.00 mm	N/A M8 x 1.25	N/A Consult Engineering Department	N/A
MG-M8F	N/A Left Hand	N/A 8.000 mm	N/A 12.00 mm	N/A 8.75 mm	N/A 36.00 mm	N/A 22.25 mm	N/A 17.00 mm	N/A M8 x 1.25	N/A Consult Engineering Department	N/A
MW-M8Z	N/A Right Hand	N/A 8.000 mm	N/A 12.00 mm	N/A 8.75 mm	N/A 36.00 mm	N/A 22.25 mm	N/A 17.00 mm	N/A M8 x 1.25	N/A Consult Engineering Department	N/A

1 - 25 of 110 | Results Per Page | View | Unit of Measure

1 2 3 4 5

Required Fields ^*

Email ^*
First Name ^*
Last Name ^*
Company ^*
Department ^*
Country ^*
Zip/Postal Code ^*
Phone Number

No Preference
M3 x 0.5
M5 x 0.8
M6 x 1.0
M8 x 1.0
M8 x 1.25
M10 x 1.25
M10 x 1.5
M12 x 1.25
M12 x 1.75
M14 x 1.5
M14 x 2.0
M16 x 1.5
M16 x 2.0
M18 x 1.5
M20 x 1.5
M20 x 2.5
M22 x 1.5
M24 x 2.0
M30 x 2.0