SC Type Spacer Coupling Hubs with Rough Stock Bore, Standard Length On The Timken Company

Batch CAD Cart (0) ▾

Specifically designed for the pump industry, this coupling accommodates industry standard as well as special pump/motor separation
This shaft separation facilitates easy pump repair of pump packing, bearings, and seals without disturbing pump or motor mounting and alignment
The SC Type coupling consists of two flanges, a sleeve and two shaft hubs

Quick Coupling Removal

The center drop out section consists of two flanges and the flexible sleeve
The flange is bolted to the shaft hub with four hex head cap screws
The center drop out section can be removed by removing the hex head cap screws
Flats on each hub provides a convenient grip for a wrench in order to facilitate loosening of the screws and, if desired, turning of the pump/motor shafts
Once the hub is removed from the pump shaft, maintenance on the pump can be done without disturbing equipment alignment

1 - 2 of 2 | Results Per Page | View | Unit of Measure

Request Information Compare Items

Clear Filter

Part Number	Description	Bore Size	Hub #	Keyway Size (W x D)	Outside Diameter	Dimension L	Dimension SL	Add To Cart/Request Quote

68514436751	N/A 13SCH-SPCR HUB-1-3/8-NKW-RSB	N/A 1 3/8 in	N/A 13SCH	N/A No Keyway	N/A 6.130 in155.70 mm	N/A 3.340 in84.84 mm	N/A 1.650 in41.91 mm	Add To Cart Request Quote
68514436758	N/A 14SCH-SPCR HUB-1-3/4-NKW-RSB	N/A 1 3/4 in	N/A 14SCH	N/A No Keyway	N/A 6.5 in165.10 mm	N/A 3.380 in85.85 mm	N/A 1.920 in48.77 mm	Add To Cart Request Quote

1 - 2 of 2 | Results Per Page | View | Unit of Measure