• Timken_TRB_SINGLECUP_TS
  • TRB TS Cup Line Drawing
This is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft.
501 - 525 of 1864 | Results Per Page | View | Unit of Measure
« 21 22 23 24 25 »  
Compare Items
Clear Filter

O.D. (D) (in)

O.D. (D) (mm)

Part Number

O.D. (D)

Outer Ring Width (C)

CAD

414A N/A 3.4843 in88.501 mm N/A 0.875 in22.225 mm N/A
414X N/A 3.500 in88.9 mm N/A 0.875 in22.225 mm N/A
414XA N/A 3.5433 in90 mm N/A 0.875 in22.225 mm N/A
421417 N/A 14.1732 in359.999 mm N/A 2.5000 in63.500 mm N/A
421437 N/A 14.3720 in365.049 mm N/A 2.5000 in63.500 mm N/A
421450 N/A 14.500 in368.300 mm N/A 2.5000 in63.500 mm N/A
423296 N/A 29.5200 in749.808 mm N/A 3.7500 in95.250 mm N/A
423300 N/A 29.9950 in761.873 mm N/A 3.7500 in95.250 mm N/A
424405 N/A 40.5000 in1028.700 mm N/A 4.75 in120.65 mm N/A
425299 N/A 29.9950 in761.873 mm N/A 4 in101.6 mm N/A
42584 N/A 5.8437 in148.430 mm N/A 0.8438 in21.433 mm N/A
42584XX N/A 5.8437 in148.430 mm N/A 0.8438 in21.433 mm N/A
42585 N/A 5.8437 in148.430 mm N/A 1 in25.4 mm N/A
42586 N/A 5.8437 in148.430 mm N/A 1.25 in31.75 mm N/A
42587 N/A 5.8750 in149.225 mm N/A 0.9688 in24.608 mm N/A
42590 N/A 5.9045 in149.974 mm N/A 0.9688 in24.608 mm N/A
42620 N/A 5.000 in127 mm N/A 0.875 in22.225 mm N/A
42624 N/A 5.1171 in129.974 mm N/A 1.063 in27 mm N/A
426330 N/A 33.0000 in838.2 mm N/A 4.125 in104.775 mm N/A
428420 N/A 42.0000 in1066.800 mm N/A 5.5 in139.7 mm N/A
428423 N/A 42.1220 in1069.899 mm N/A 5.5 in139.7 mm N/A
429XS N/A 3.5433 in90 mm N/A 1 in25.4 mm N/A
430X N/A 3.5433 in90 mm N/A 0.875 in22.225 mm N/A
431575 N/A 15.7500 in400.050 mm N/A 2.5000 in63.500 mm N/A
432 N/A 3.7500 in95.250 mm N/A 0.875 in22.225 mm N/A
501 - 525 of 1864 | Results Per Page | View | Unit of Measure
« 21 22 23 24 25 »