• Timken_TRB_SINGLECUP_TS
  • TRB TS Cup Line Drawing
This is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft.
51 - 75 of 1864 | Results Per Page | View | Unit of Measure
1 2 3 4 5 »  
Compare Items
Clear Filter

O.D. (D) (in)

O.D. (D) (mm)

Part Number

O.D. (D)

Outer Ring Width (C)

CAD

N/A 9.8750 in250.825 mm N/A 1.8750 in47.625 mm N/A
N/A 9.8750 in250.825 mm N/A 1.8750 in47.625 mm N/A
N/A 14.7500 in374.650 mm N/A 2.3750 in60.325 mm N/A
N/A 26.5000 in673.100 mm N/A 4.5 in114.3 mm N/A
N/A 26.5000 in673.100 mm N/A 4.5 in114.3 mm N/A
N/A 2.25 in57.150 mm N/A 0.6875 in17.463 mm N/A
N/A 12.5000 in317.500 mm N/A 2 in50.8 mm N/A
N/A 3.0312 in76.992 mm N/A 0.4688 in11.908 mm N/A
N/A 14.5000 in368.300 mm N/A 2.1250 in53.975 mm N/A
N/A 1.9380 in49.225 mm N/A 0.6250 in15.875 mm N/A
N/A 15.0000 in381.000 mm N/A 2.2500 in57.150 mm N/A
N/A 13.7460 in349.148 mm N/A 1.7500 in44.450 mm N/A
N/A 13.8125 in350.838 mm N/A 1.7500 in44.450 mm N/A
N/A 13.9960 in355.498 mm N/A 1.7500 in44.450 mm N/A
N/A 14 in355.6 mm N/A 1.7500 in44.450 mm N/A
N/A 16.0000 in406.400 mm N/A 2.1250 in53.975 mm N/A
N/A 16.1410 in409.981 mm N/A 2.1250 in53.975 mm N/A
N/A 17.2460 in438.048 mm N/A 2.1250 in53.975 mm N/A
N/A 17.3208 in439.948 mm N/A 2.1250 in53.975 mm N/A
N/A 14 in355.6 mm N/A 1.9375 in49.213 mm N/A
N/A 12.5000 in317.500 mm N/A 1.3750 in34.925 mm N/A
N/A 12.5625 in319.088 mm N/A 1.3750 in34.925 mm N/A
N/A 2.0625 in52.388 mm N/A 0.5625 in14.288 mm N/A
N/A 2.0625 in52.388 mm N/A 0.5625 in14.288 mm N/A
N/A 2.0625 in52.388 mm N/A 0.5625 in14.288 mm N/A
51 - 75 of 1864 | Results Per Page | View | Unit of Measure
1 2 3 4 5 »