Montage of Timken Bearing Products
Batch CAD Cart (0) ▾
  • Cart is empty
  1. Click Here for Batch Download
Request Information Search by Specification
  • SPM & SPB Image

    Aurora Bearing SPM & SPB Series Male Rod Ends - Molded Race - Economy

    (16)

    This series features a molded race compound designed to provide low friction.

    • Body - Low carbon steel - protective coated for corrosion resistance.
    • Ball - Alloy steel - heat treated - hard chrome plated.
    • Race - Molded, self-lubricating, reinforced Nylon.
    • Studded configuration available upon request. Specify by adding suffix "S". Ex.: SPM-8S.

  • SPW & SPG Image

    Aurora Bearing SPW & SPG Series Female Rod Ends - Molded Race - Economy

    (16)

    This series features a molded race compound designed to provide low friction.

    • Body - Low carbon steel - protective coated for corrosion resistance.
    • Ball - Alloy steel - heat treated - hard chrome plated.
    • Race - Molded, self-lubricating, reinforced Nylon.
    • Studded configuration available upon request. Specify by adding suffix "S". Ex.: SPW-8S.

  • CM & CB Image

    Aurora Bearing CM & CB Series Male Rod Ends - General Purpose - Economy

    (36)

    • Body - Low carbon steel - protective coated for corrosion resistance.
    • Ball - Alloy steel - heat treated - hard chrome plated.
    • Grease Fitting available for sizes -6 and up. Units are supplied without grease fittings. When a grease fitting is required, specify by adding suffix "Z" or "F". Ex.: CM-6Z = Zerk Type Fitting CM-6F = Flush Type Fitting
    • Load ratings apply only to rod ends without grease fittings. For load ratings with fittings, please consult our engineering department.
    • Studded configuration available upon request. Specify by adding suffix "S". Ex.: CM-8S.

  • CW & CG Image

    Aurora Bearing CW & CG Series Female Rod Ends - General Purpose - Economy

    (44)

    • Body - Low carbon steel - protective coated for corrosion resistance.
    • Ball - Alloy steel - heat treated - hard chrome plated.
    • Left-hand threaded units have an identification groove near end of shank.
    • Grease Fitting available for sizes -4 and up. Units are supplied without grease fittings. When a grease fitting is required, specify by adding suffix "Z" or "F". Ex.: CW-6Z = Zerk Type Fitting CW-6F = Flush Type Fitting
    • Load ratings apply only to rod ends without grease fittings. For load ratings with fittings, please consult our engineering department.
    • Studded configuration available upon request. Specify by adding suffix "S". Ex.: CW-8S.

  • CM-S & CB-S Image

    Aurora Bearing CM-S & CB-S Series Male Rod Ends with Studs - General Purpose - Economy

    (16)

    • Body - Low carbon steel - protective coated for corrosion resistance.
    • Ball - Alloy steel - heat treated - hard chrome plated.
    • Stud - Low carbon steel - protective coated for corrosion resistance. Right hand threads are standard.
    • Grease Fitting available for sizes -6 and up. Units are supplied without grease fittings. When a grease fitting is required, specify by adding suffix "Z" or "F". Ex.: CM-6SZ = Zerk Type Fitting CM-6SF = Flush Type Fitting.
    • Optional grease fitting is supplied, standard, in right hand location (with stud facing away from you). Specify if left hand location is desired.

  • CW-S & CG-S Image

    Aurora Bearing CW-S & CG-S Series Female Rod Ends with Studs - General Purpose - Economy

    (16)

    • Body - Low carbon steel - protective coated for corrosion resistance.
    • Ball - Alloy steel - heat treated - hard chrome plated.
    • Stud - Low carbon steel - protective coated for corrosion resistance. Right hand threads are standard.
    • Left hand units have identification groove near end of shank.
    • Grease Fitting available for sizes -4 and up. Units are supplied without grease fittings. When a grease fitting is required, specify by adding suffix "Z" or "F". Ex.: CW-6SZ = Zerk Type Fitting CW-6SF = Flush Type Fitting.
    • Optional grease fitting is supplied, standard, in right hand location (with stud facing away from you). Specify if left hand location is desired.

  • VCM & VCB Image

    Aurora Bearing VCM & VCB Series Male Rod Ends - General Purpose - Economy - Self-Lubricating

    (12)

    • Body - Low carbon steel - protective coated for corrosion resistance.
    • Ball - Alloy steel - heat treated - hard chrome plated.
    • Bushing - Steel backed, PTFE composite.
    • Studded configuration available upon request. Specify by adding suffix "S". Ex.: VCM-8S.

  • VCW & VCG Image

    Aurora Bearing VCW & VCG Series Female Rod Ends - General Purpose - Economy - Self-Lubricating

    (12)

    • Body - Low carbon steel - protective coated for corrosion resistance.
    • Ball - Alloy steel - heat treated - hard chrome plated.
    • Bushing - Steel backed, PTFE composite.
    • Left-hand threaded units have an identification groove near end of shank.
    • Studded configuration available upon request. Specify by adding suffix "S". Ex.: VCW-8S.

  • CAM & CAB Image

    Aurora Bearing CAM & CAB Series Male Rod Ends - High Strength - Economy Series

    (32)

    • Body - Alloy steel - heat treated - protective coated for corrosion resistance.
    • Ball - Alloy steel - heat treated - hard chrome plated.
    • Grease Fitting available for sizes -6 and up. Units are supplied without grease fittings. When a grease fitting is required, specify by adding suffix "Z" or "F". Ex.: CAM-6Z = Zerk Type Fitting CAM-6F = Flush Type Fitting.
    • Load ratings apply only to rod ends without grease fittings. For load ratings with fittings, please consult our engineering department.
    • Studded configuration available upon request. Specify by adding suffix "S". Ex.: CAM-8S.

  • VCAM & VCAB Image

    Aurora Bearing VCAM & VCAB Series Male Rod Ends - High Strength - Self-Lubricating Economy Series

    (12)

    • Body - Alloy steel - heat treated - protective coated for corrosion resistance.
    • Ball - Alloy steel - heat treated - hard chrome plated.
    • Bushing – Steel backed, PTFE composite.
    • Studded configuration available upon request. Specify by adding suffix "S". Ex.: VCAM-8S.

  • SM & SB Image

    Aurora Bearing BM & BB Series Male Rod Ends - General Purpose - Light Duty

    (48)

    • Body - Low carbon steel - protective coated for corrosion resistance.
    • Ball - Alloy steel - heat treated - hard chrome plated.
    • Race - Sintered brass - oil impregnated.
    • Units are supplied without grease fittings. When a grease fitting is required, specify by adding suffix "Z" or "F". Ex.: BM-6Z = Zerk Type Fitting BM-6F = Flush Type Fitting.
    • Load ratings apply only to rod ends without grease fittings. For load ratings with fittings, please consult our engineering department.
    • Studded configuration available upon request. Specify by adding suffix "S". Ex.: BM-8S.

  • SW & SG Image

    Aurora Bearing BW & BG Series Female Rod Ends - General Purpose - Light Duty

    (48)

    • Body - Low carbon steel - protective coated for corrosion resistance.
    • Ball - Alloy steel - heat treated - hard chrome plated.
    • Race - Sintered brass - oil impregnated.
    • Left-hand threaded units have an identification groove near end of shank.
    • Units are supplied without grease fittings. When a grease fitting is required, specify by adding suffix "Z" or "F". Ex.: BW-6Z = Zerk Type Fitting BW-6F = Flush Type Fitting.
    • Load ratings apply only to rod ends without grease fittings. For load ratings with fittings, please consult our engineering department.
    • Studded configuration available upon request. Specify by adding suffix "S". Ex.: BW-8S.

  • MM & MB Image

    Aurora Bearing MM & MB Series Male Rod Ends - General Purpose - Precision

    (80)

    • Body - Low carbon steel - protective coated for corrosion resistance. Size 16 standard series body is alloy steel not heat treated.
    • Ball - Alloy steel - heat treated - hard chrome plated.
    • Race - Low carbon steel - protective coated for corrosion resistance.
    • Grease Fitting available for sizes -3 and up. Units are supplied without grease fittings. When a grease fitting is required, specify by adding suffix "Z" or "F". Ex.: MM-6Z = Zerk Type Fitting MM-6F = Flush Type Fitting.
    • Load ratings apply only to rod ends without grease fittings. For load ratings with fittings, please consult our engineering department.
    • Studded configuration available upon request. Specify by adding suffix "S". Ex.: MM-8S.
    • PTFE Liners available upon request. Specify by adding suffix "T". Ex.: MM-8T.

  • MW & MG Image

    Aurora Bearing MW & MG Series Female Rod Ends - General Purpose - Precision

    (80)

    • Body - Low carbon steel - protective coated for corrosion resistance. Size 16 standard series body is alloy steel not heat treated.
    • Ball - Alloy steel - heat treated - hard chrome plated.
    • Race - Low carbon steel - protective coated for corrosion resistance.
    • Left-hand threaded units have an identification groove near end of shank.
    • Grease Fitting available for sizes -3 and up. Units are supplied without grease fittings. When a grease fitting is required, specify by adding suffix "Z" or "F". Ex.: MW-6Z = Zerk Type Fitting MW-6F = Flush Type Fitting.
    • Load ratings apply only to rod ends without grease fittings. For load ratings with fittings, please consult our engineering department.
    • Studded configuration available upon request. Specify by adding suffix "S". Ex.: MW-8S.
    • PTFE Liners available upon request. Specify by adding suffix "T". Ex.: MW-8T.

  • MM-T & MB-T Image

    Aurora Bearing MM-T & MB-T Series Male Rod Ends (PTFE) Lined - General Purpose - Precision - Self-Lubricating

    (24)

    • Body - Low carbon steel - protective coated for corrosion resistance. Size 16 standard series body is alloy steel not heat treated.
    • Ball - Alloy steel - heat treated - hard chrome plated.
    • Race - Low carbon steel - protective coated for corrosion resistance - PTFE lined.
    • Studded configuration available upon request. Specify by adding suffix "S". Ex.: MM-8TS.

  • MW-T & MG-T Image

    Aurora Bearing MW-T & MG-T Series Female Rod Ends (PTFE) Lined - General Purpose - Precision - Self-Lubricating

    (24)

    • Body - Low carbon steel - protective coated for corrosion resistance. Size 16 standard series body is alloy steel not heat treated.
    • Ball - Alloy steel - heat treated - hard chrome plated.
    • Race - Low carbon steel - protective coated for corrosion resistance - PTFE lined.
    • Left-hand threaded units have an identification groove near end of shank.
    • Studded configuration available upon request. Specify by adding suffix "S". Ex.: MW-8TS.

  • KM & KB Image

    Aurora Bearing KM & KB Series Male Rod Ends - General Purpose - Precision - Wear Resistant

    (72)

    • Body - Low carbon steel - protective coated for corrosion resistance. Size 16 standard series body is alloy steel not heat treated.
    • Ball - Alloy steel - heat treated - hard chrome plated.
    • Race - Alloy steel - heat treated - protective coated for corrosion resistance.
    • Units are supplied without grease fittings. When a grease fitting is required, specify by adding suffix "Z" or "F". Ex.: KM-6Z = Zerk Type Fitting KM-6F = Flush Type Fitting.
    • Load ratings apply only to rod ends without grease fittings. For load ratings with fittings, please consult our engineering department.
    • Studded configuration available upon request. Specify by adding suffix "S". Ex.: KM-8S.

  • KW & KG Image

    Aurora Bearing KW & KG Series Female Rod Ends - General Purpose - Precision - Wear Resistant

    (72)

    • Body - Low carbon steel - protective coated for corrosion resistance. Size 16 standard series body is alloy steel not heat treated.
    • Ball - Alloy steel - heat treated - hard chrome plated.
    • Race - Alloy steel - heat treated - protective coated for corrosion resistance.
    • Left-hand threaded units have an identification groove near end of shank.
    • Units are supplied without grease fittings. When a grease fitting is required, specify by adding suffix "Z" or "F". Ex.: KW-6Z = Zerk Type Fitting KW-6F = Flush Type Fitting.
    • Load ratings apply only to rod ends without grease fittings. For load ratings with fittings, please consult our engineering department.
    • Studded configuration available upon request. Specify by adding suffix "S". Ex.: KW-8S.

  • SM & SB Image

    Aurora Bearing SM & SB Series Male Rod Ends - Corrosion Resistant

    (48)

    • Body - Low carbon steel - electroless nickel plated.
    • Ball - Alloy steel - heat treated - hard chrome plated.
    • Race - Stainless steel - heat treated.
    • Units are supplied without grease fittings. When a grease fitting is required, specify by adding suffix "Z" or "F". Ex.: SM-6Z = Zerk Type Fitting SM-6F = Flush Type Fitting.
    • Load ratings apply only to rod ends without grease fittings. For load ratings with fittings, please consult our engineering department.
    • Studded configuration available upon request. Specify by adding suffix "S". Ex.: SM-8S.
    • PTFE Liners available upon request. Specify by adding suffix "T". Ex.: SM-8T.

  • SW & SG Image

    Aurora Bearing SW & SG Series Female Rod Ends - Corrosion Resistant

    (48)

    • Body - Low carbon steel - electroless nickel plated.
    • Ball - Alloy steel - heat treated - hard chrome plated.
    • Race - Stainless steel - heat treated.
    • Left-hand threaded units have an identification groove near end of shank.
    • Units are supplied without grease fittings. When a grease fitting is required, specify by adding suffix "Z" or "F". Ex.: SW-6Z = Zerk Type Fitting SW-6F = Flush Type Fitting.
    • Load ratings apply only to rod ends without grease fittings. For load ratings with fittings, please consult our engineering department.
    • Studded configuration available upon request. Specify by adding suffix "S". Ex.: SW-8S.
    • PTFE Liners available upon request. Specify by adding suffix "T". Ex.: SW-8T.

  • MM-T & MB-T Image

    Aurora Bearing SM-T & SB-T Series Male Rod Ends (PTFE) Lined - Corrosion Resistant - Precision - Self-Lubricating

    (16)

    • Body - Low carbon steel - electroless nickel plated.
    • Ball - Alloy steel - heat treated - hard chrome plated.
    • Race - Stainless steel - heat treated - PTFE lined.
    • Studded configuration available upon request. Specify by adding suffix "S". Ex.: SM-8TS.

  • MW-T & MG-T Image

    Aurora Bearing SW-T & SG-T Series Female Rod Ends (PTFE) Lined - Corrosion Resistant - Precision - Self-Lubricating

    (16)

    • Body - Low carbon steel - electroless nickel plated.
    • Ball - Alloy steel - heat treated - hard chrome plated.
    • Race - Stainless steel - heat treated - PTFE lined.
    • Left-hand threaded units have an identification groove near end of shank.
    • Studded configuration available upon request. Specify by adding suffix "S". Ex.: SW-8TS.

  • CM-ET & CB-ET Image

    Aurora Bearing CM-ET & CB-ET Series Stainless Steel Male Rod Ends (PTFE Lined) - Corrosion Resistant - Precision - Self-Lubricating

    (12)

    • Body - 17-4 PH stainless steel - heat treated.
    • Ball - 440C stainless steel - heat treated - hard chrome plated (MFG. option).
    • Bushing – 17-4 PH stainless steel - heat treated - PTFE lined.
    • Studded configuration available upon request. Specify by adding suffix "S". Ex.: CM-8ETS.

  • CW-ET & CG-ET Image

    Aurora Bearing CW-ET & CG-ET Series Stainless Steel Female Rod Ends (PTFE Lined) - Corrosion Resistant - Precision - Self-Lubricating

    (12)

    • Body - 17-4 PH stainless steel - heat treated.
    • Ball - 440C stainless steel - heat treated - hard chrome plated (MFG. option).
    • Bushing – 17-4 PH stainless steel - heat treated - PTFE lined.
    • Studded configuration available upon request. Specify by adding suffix "S". Ex.: CW-8ETS.

  • SM-E & SB-E Image

    Aurora Bearing SM-E & SB-E Series Stainless Steel Male Rod Ends - Corrosion Resistant

    (54)

    • Body - 17-4 PH stainless steel - heat treated.
    • Ball - 440C stainless steel - heat treated - hard chrome plated (MFG. option).
    • Race - 17-4 PH stainless steel - heat treated.
    • Units are supplied without grease fittings. When a grease fitting is required, specify by adding suffix "Z" or "F". Ex.: SM-6EZ = Zerk Type Fitting SM-6EF = Flush Type Fitting.
    • Load ratings apply only to rod ends without grease fittings. For load ratings with fittings, please consult our engineering department.
    • Studded configuration available upon request. Specify by adding suffix "S". Ex.: SM-8ES.
    • PTFE Liners available upon request. Specify by adding suffix "T". Ex.: SM-8ET.

  • SW-E & SG-E Image

    Aurora Bearing SW-E & SG-E Series Stainless Steel Female Rod Ends - Corrosion Resistant

    (54)

    • Body - 17-4 PH stainless steel - heat treated.
    • Ball - 440C stainless steel - heat treated - hard chrome plated (MFG. option).
    • Race - 17-4 PH stainless steel - heat treated.
    • Units are supplied without grease fittings. When a grease fitting is required, specify by adding suffix "Z" or "F". Ex.: SW-6EZ = Zerk Type Fitting SW-6EF = Flush Type Fitting.
    • Load ratings apply only to rod ends without grease fittings. For load ratings with fittings, please consult our engineering department.
    • Studded configuration available upon request. Specify by adding suffix "S". Ex.: SW-8ES.
    • PTFE Liners available upon request. Specify by adding suffix "T". Ex.: SW-8ET.

  • MM-T & MB-T Image

    Aurora Bearing SM-ET & SB-ET Series Male Rod Ends (PTFE) Lined - Corrosion Resistant - Precision - Self-Lubricating

    (22)

    • Body - 17-4 PH stainless steel - heat treated.
    • Ball - 440C stainless steel - heat treated - hard chrome plated (mfg. option).
    • Race - 17-4 PH stainless steel - heat treated - PTFE lined.
    • Studded configuration available upon request. Specify by adding suffix "S". Ex.: SM-8ETS.

  • MW-T & MG-T Image

    Aurora Bearing SW-ET & SG-ET Series Female Rod Ends (PTFE) Lined - Corrosion Resistant - Precision - Self-Lubricating

    (22)

    • Body -17-4 PH stainless steel - heat treated.
    • Ball - 440C stainless steel - heat treated - hard chrome plated (mfg. option).
    • Race - 17-4 PH stainless steel - heat treated - PTFE lined.
    • Left-hand threaded units have an identification groove near end of shank.
    • Studded configuration available upon request. Specify by adding suffix "S". Ex.: SW-8ETS.

  • KM & KB, AM & AB Large Bore Image

    Aurora Bearing KM & KB, AM & AB Large Bore Series Male Rod Ends - General Purpose & High Strength - Precision - Wear Resistant

    (48)

    • Body (K-Series) - Alloy steel - protective coated for corrosion resistance.
    • Body (A-Series) - Alloy steel - heat treated - protective coated for corrosion resistance.
    • Ball - 52100 steel - heat treated - protective coated for corrosion resistance.
    • Race - 52100 steel - heat treated - protective coated for corrosion resistance.
    • Units are supplied without grease fittings. When a grease fitting is required, specify by adding suffix "Z" or "F". Ex.: KM-24Z-1 = Zerk Type Fitting KM-24F-1 = Flush Type Fitting.
    • Load ratings apply only to rod ends without grease fittings. For load ratings with fittings, please consult our engineering department.
    • PTFE Liners available upon request. Specify by adding suffix "T". Ex.: KM-24T-1.

  • KW & KG, AW & AG Large Bore Image

    Aurora Bearing KW & KG, AW & AG Large Bore Series Female Rod Ends - General Purpose & High Strength - Precision - Wear Resistant

    (36)

    • Body (K-Series) - Alloy steel - protective coated for corrosion resistance.
    • Body (A-Series) - Alloy steel - heat treated - protective coated for corrosion resistance.
    • Ball - 52100 steel - heat treated - protective coated for corrosion resistance.
    • Race - 52100 steel - heat treated - protective coated for corrosion resistance.
    • Units are supplied without grease fittings. When a grease fitting is required, specify by adding suffix "Z" or "F". Ex.: KW-24Z-1 = Zerk Type Fitting KW-24F-1 = Flush Type Fitting.
    • Load ratings apply only to rod ends without grease fittings. For load ratings with fittings, please consult our engineering department.
    • PTFE Liners available upon request. Specify by adding suffix "T". Ex.: KW-24T-1.

  • MM-T & MB-T, AM-T & AB-T Large Bore Image

    Aurora Bearing MM-T & MB-T, AM-T & AB-T Large Bore Series Male Rod Ends - General Purpose & High Strength - Precision - PTFE Lined - Self-Lubricating

    (12)

    • Body (M-Series) - Alloy steel - protective coated for corrosion resistance.
    • Body (A-Series) - Alloy steel - heat treated - protective coated for corrosion resistance.
    • Ball - Alloy steel - heat treated - hard chrome plated.
    • Race - Low carbon steel - protective coated for corrosion resistance - PTFE lined.

  • MW-T & MG-T, AW-T & AG-T Large Bore Image

    Aurora Bearing MW-T & MG-T, AW-T & AG-T Large Bore Series Female Rod Ends - General Purpose & High Strength - Precision - PTFE Lined - Self-Lubricating

    (12)

    • Body (M-Series) - Alloy steel - protective coated for corrosion resistance.
    • Body (A-Series) - Alloy steel - heat treated - protective coated for corrosion resistance.
    • Ball - Alloy steel - heat treated - hard chrome plated.
    • Race - Low carbon steel - protective coated for corrosion resistance - PTFE lined.

  • AM & AB Image

    Aurora Bearing AM & AB Series Male Rod Ends - High Strength Alloy - Precision

    (84)

    • Body - Alloy Steel - heat treated - protective coated for corrosion resistance.
    • Ball - Alloy steel - heat treated - hard chrome plated.
    • Race - Alloy steel - heat treated - protective coated for corrosion resistance.
    • Units in this series will be magnafluxed on special request only. Specify by adding suffix "M". Ex.: AM-8M.
    • Units are supplied without grease fittings. When a grease fitting is required, specify by adding suffix "Z" or "F". Ex.: AM-6Z = Zerk Type Fitting AM-6F = Flush Type Fitting.
    • Load ratings apply only to rod ends without grease fittings. For load ratings with fittings, please consult our engineering department.
    • Studded configuration available upon request. Specify by adding suffix "S". Ex.: AM-8S.
    • PTFE Liners available upon request. Specify by adding suffix "T". Ex.: AM-8T.

  • AW & AG Image

    Aurora Bearing AW & AG Series Female Rod Ends - High Strength Alloy - Precision

    (72)

    • Body - Alloy Steel - heat treated - protective coated for corrosion resistance.
    • Ball - Alloy steel - heat treated - hard chrome plated.
    • Race - Alloy steel - heat treated - protective coated for corrosion resistance.
    • Units in this series will be magnafluxed on special request only. Specify by adding suffix "M". Ex.: AW-8M.
    • Units are supplied without grease fittings. When a grease fitting is required, specify by adding suffix "Z" or "F". Ex.: AW-6Z = Zerk Type Fitting AW-6F = Flush Type Fitting.
    • Load ratings apply only to rod ends without grease fittings. For load ratings with fittings, please consult our engineering department.
    • Studded configuration available upon request. Specify by adding suffix "S". Ex.: AW-8S.
    • PTFE Liners available upon request. Specify by adding suffix "T". Ex.: AW-8T.

  • MM-T & MB-T Image

    Aurora Bearing AM-T & AB-T Series Male Rod Ends (PTFE) Lined - High Strength Alloy - Precision - Self-Lubricating

    (28)

    • Body -Alloy steel - heat treated - protective coated for corrosion resistance.
    • Ball - Alloy steel - heat treated - hard chrome plated.
    • Race - Low carbon steel - protective coated for corrosion resistance - PTFE lined.
    • Studded configuration available upon request. Specify by adding suffix "S". Ex.: AM-8TS.

  • MW-T & MG-T Image

    Aurora Bearing AW-T & AG-T Series Female Rod Ends (PTFE) Lined - High Strength Alloy - Precision - Self-Lubricating

    (24)

    • Body - Alloy steel - heat treated - protective coated for corrosion resistance.
    • Ball - Alloy steel - heat treated - hard chrome plated.
    • Race - Low carbon steel - protective coated for corrosion resistance - PTFE lined.
    • Left-hand threaded units have an identification groove near end of shank.
    • Studded configuration available upon request. Specify by adding suffix "S". Ex.: AW-8TS.