CAD (0) ▾
  • Cart is empty
  1. Request CAD files
TDI bearings have a one-piece double inner race and two single outer races and are typically supplied complete with an outer race spacer as a pre-set assembly. The bearing can be used at fixed positions on rotation shaft applications. For rotating housing application it can be used to float on the stationary shaft.
Request Information
Unit of Measure

Other Dimensions

Weight

 N/A 8.1 Kg17.7 lb

Inner Ring Width (B)

 N/A 4.25 in107.95 mm
Max Shaft Fillet Radius1 N/A 0.06 in1.5 mm

Shaft Backing Shoulder Diameter - Frontface (da)

 N/A 3.988 in101.3 mm

Cage Location Relative to Frontface (Ab) 

 N/A -0.03 in-0.8 mm

Key Dimensions

Series

 N/A 755

Cone Part Number

 N/A 767D

Bore (d)

 N/A 3.5 in88.9 mm
Dynamic Radial Load Rating - 90M Revs (C90) 2 N/A 19100 lbf84800 N
Dynamic Radial Load Rating - 1M Revs (C1) 3 N/A 73600 lbf327000 N
Dynamic Radial Load Rating 2-Row - 90M Revs (C90-2row) 4 N/A 33200 lbf148000 N
K Factor 5 N/A 1.71

Ratings

C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)6 N/A 128000 lbf570000 N

Static Radial Load Rating (C0)

 N/A 99200 lbf441000 N
Ca90 - Dynamic Thrust Rating (90 million revolutions)7 N/A 11100 lbf49500 N

Factors

G1 Factor

 N/A 177

G2 Factor

 N/A 32.4
Geometry Factor (Cg)8 N/A 0.0945
  • 1 These maximum fillet radii will be cleared by the bearing corners.
  • 2 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
  • 3 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
  • 4 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
  • 5 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 6 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
  • 7 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
  • 8 Geometry constant for Lubrication Life Adjustment Factor a3l.