TDI bearings have a one-piece double inner race and two single outer races and are typically supplied complete with an outer race spacer as a pre-set assembly. The bearing can be used at fixed positions on rotation shaft applications. For rotating housing application it can be used to float on the stationary shaft.

RELATED PRODUCTS

Unit of Measure

Key Dimensions

Cone Part Number

 N/A EE126096D

Bore (d)

 N/A 9.6250 in244.475 mm
Dynamic Radial Load Rating - 1M Revs (C1) 1 N/A 204000 lbf907000 N
Dynamic Radial Load Rating - 90M Revs (C90) 2 N/A 52900 lbf235000 N
Dynamic Radial Load Rating 2-Row - 90M Revs (C90-2row) 3 N/A 92100 lbf410000 N
e Factor 4 N/A 1.17
K Factor 5 N/A 1.13

Note

 N/A This part has a non-standard shoulder design. Please email customer CAD for shoulder details to ensure the proper design of mating components.

Other Dimensions

Weight

 N/A 58.3 Kg128.4 lb

Inner Ring Width (B)

 N/A 5.7500 in146.050 mm
Max Shaft Fillet Radius6 N/A 0.13 in3.300 mm

Shaft Backing Shoulder Dia. - Frontface (da)

 N/A 10.59 in269 mm

Cage Location rel. to FF (Ab)

 N/A 0.01 in0.3 mm

Ratings

Dynamic Axial Rating - 90M Revs (Ca90)7 N/A 46800 lbf208000 N
Dynamic Radial Load Rating 2-Row - 1M Revs (C1)8 N/A 355000 lbf1580000 N

Static Radial Load Rating (C0)

 N/A 381000 lbf1690000 N

Factors

G1 Factor

 N/A 1320

G2 Factor

 N/A 169
Geometry Factor (Cg)9 N/A 0.164
  • 1 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
  • 2 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
  • 3 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
  • 4 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 5 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 6 These maximum fillet radii will be cleared by the bearing corners.
  • 7 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
  • 8 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
  • 9 Geometry constant for Lubrication Life Adjustment Factor a3l.