TDI bearings have a one-piece double inner race and two single outer races and are typically supplied complete with an outer race spacer as a pre-set assembly. The bearing can be used at fixed positions on rotation shaft applications. For rotating housing application it can be used to float on the stationary shaft.

RELATED PRODUCTS

Unit of Measure

Key Dimensions

Cone Part Number

 N/A EE325296D

Bore (d)

 N/A 29.5000 in749.300 mm
Dynamic Radial Load Rating - 1M Revs (C1) 1 N/A 1600000 lbf7120000 N
Dynamic Radial Load Rating - 90M Revs (C90) 2 N/A 415000 lbf1850000 N
Dynamic Radial Load Rating 2-Row - 90M Revs (C90-2row) 3 N/A 723000 lbf3220000 N
K Factor 4 N/A 1.77

Note

 N/A This part has a non-standard shoulder design. Please email customer CAD for shoulder details to ensure the proper design of mating components.

Other Dimensions

Weight

 N/A 1007.6 Kg2221.5 lb

Inner Ring Width (B)

 N/A 13.7500 in349.250 mm
Max Shaft Fillet Radius5 N/A 0.370 in9.5 mm

Shaft Backing Shoulder Dia. - Frontface (da)

 N/A 31.75 in806.45 mm

Cage Location rel. to FF (Ab)

 N/A 0.43 in10.92 mm

Ratings

Dynamic Axial Rating - 90M Revs (Ca90)6 N/A 234000 lbf1040000 N
Dynamic Radial Load Rating 2-Row - 1M Revs (C1)7 N/A 2790000 lbf12400000 N

Static Radial Load Rating (C0)

 N/A 3640000 lbf16200000 N

Factors

G1 Factor

 N/A 21200

G2 Factor

 N/A 980
Geometry Factor (Cg)8 N/A 0.355
  • 1 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
  • 2 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
  • 3 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
  • 4 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 5 These maximum fillet radii will be cleared by the bearing corners.
  • 6 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
  • 7 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
  • 8 Geometry constant for Lubrication Life Adjustment Factor a3l.