CAD (0) ▾
  • Cart is empty
  1. Request CAD files
TDI bearings have a one-piece double inner race and two single outer races and are typically supplied complete with an outer race spacer as a pre-set assembly. The bearing can be used at fixed positions on rotation shaft applications. For rotating housing application it can be used to float on the stationary shaft.
Request Information
Unit of Measure

Other Dimensions

Weight

 N/A 923.7 Kg2036.4 lb

Inner Ring Width (B)

 N/A 14.5000 in368.300 mm
Max Shaft Fillet Radius1 N/A 0.25 in6.4 mm

Shaft Backing Shoulder Diameter - Frontface (da)

 N/A 20.31 in516 mm

Cage Location Relative to Frontface (Ab) 

 N/A -0.18 in-4.57 mm

Key Dimensions

Series

 N/A 480000

Cone Part Number

 N/A EE480181D

Bore (d)

 N/A 18 in457.2 mm
Dynamic Radial Load Rating - 90M Revs (C90) 2 N/A 361000 lbf1600000 N
Dynamic Radial Load Rating - 1M Revs (C1) 3 N/A 1390000 lbf6190000 N
Dynamic Radial Load Rating 2-Row - 90M Revs (C90-2row) 4 N/A 628000 lbf2790000 N
K Factor 5 N/A 1.62

Ratings

C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)6 N/A 2420000 lbf10800000 N

Static Radial Load Rating (C0)

 N/A 1980000 lbf8790000 N
Ca90 - Dynamic Thrust Rating (90 million revolutions)7 N/A 222000 lbf989000 N

Factors

G1 Factor

 N/A 7380

G2 Factor

 N/A 343
Geometry Factor (Cg)8 N/A 0.257
  • 1 These maximum fillet radii will be cleared by the bearing corners.
  • 2 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
  • 3 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
  • 4 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
  • 5 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 6 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
  • 7 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
  • 8 Geometry constant for Lubrication Life Adjustment Factor a3l.