CAD (0) ▾
  • Cart is empty
  1. Request CAD files
TDI bearings have a one-piece double inner race and two single outer races and are typically supplied complete with an outer race spacer as a pre-set assembly. The bearing can be used at fixed positions on rotation shaft applications. For rotating housing application it can be used to float on the stationary shaft.
Request Information
Unit of Measure

Other Dimensions

Weight

 N/A 34.1 Kg75.1 lb

Inner Ring Width (B)

 N/A 6.25 in158.75 mm
Max Shaft Fillet Radius1 N/A 0.06 in1.5 mm

Shaft Backing Shoulder Diameter - Frontface (da)

 N/A 7.64 in194 mm

Cage Location Relative to Frontface (Ab) 

 N/A 0.2 in5.1 mm

Key Dimensions

Series

 N/A HM237500

Cone Part Number

 N/A HM237546DD

Bore (d)

 N/A 7 in177.8 mm
Dynamic Radial Load Rating - 90M Revs (C90) 2 N/A 48000 lbf214000 N
Dynamic Radial Load Rating - 1M Revs (C1) 3 N/A 185000 lbf824000 N
Dynamic Radial Load Rating 2-Row - 90M Revs (C90-2row) 4 N/A 83600 lbf372000 N
K Factor 5 N/A 1.83

Ratings

C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)6 N/A 322000 lbf1430000 N

Static Radial Load Rating (C0)

 N/A 278000 lbf1240000 N
Ca90 - Dynamic Thrust Rating (90 million revolutions)7 N/A 26200 lbf117000 N

Factors

Geometry Factor (Cg)8 N/A 0.117
  • 1 These maximum fillet radii will be cleared by the bearing corners.
  • 2 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
  • 3 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
  • 4 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
  • 5 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 6 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
  • 7 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
  • 8 Geometry constant for Lubrication Life Adjustment Factor a3l.