CAD (0) ▾
  • Cart is empty
  1. Request CAD files
TDI bearings have a one-piece double inner race and two single outer races and are typically supplied complete with an outer race spacer as a pre-set assembly. The bearing can be used at fixed positions on rotation shaft applications. For rotating housing application it can be used to float on the stationary shaft.
Request Information
Unit of Measure

Other Dimensions

Weight

 N/A 197.3 Kg435 lb

Inner Ring Width (B)

 N/A 6.9375 in176.213 mm
Max Shaft Fillet Radius1 N/A 0.13 in3.3 mm

Shaft Backing Shoulder Diameter - Frontface (da)

 N/A 26.88 in682.75 mm

Cage Location Relative to Frontface (Ab) 

 N/A 0.27 in6.9 mm

Key Dimensions

Series

 N/A L281100

Cone Part Number

 N/A L281149D

Bore (d)

 N/A 26 in660.4 mm
Dynamic Radial Load Rating - 90M Revs (C90) 2 N/A 159000 lbf709000 N
Dynamic Radial Load Rating - 1M Revs (C1) 3 N/A 615000 lbf2730000 N
Dynamic Radial Load Rating 2-Row - 90M Revs (C90-2row) 4 N/A 278000 lbf1230000 N
K Factor 5 N/A 1.76

Note

 N/A This part has a non-standard shoulder design. Please email customer CAD for shoulder details to ensure the proper design of mating components.

Ratings

C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)6 N/A 1070000 lbf4760000 N

Static Radial Load Rating (C0)

 N/A 1490000 lbf6620000 N
Ca90 - Dynamic Thrust Rating (90 million revolutions)7 N/A 90700 lbf404000 N

Factors

G1 Factor

 N/A 12600

G2 Factor

 N/A 984
Geometry Factor (Cg)8 N/A 0.297
  • 1 These maximum fillet radii will be cleared by the bearing corners.
  • 2 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
  • 3 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
  • 4 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
  • 5 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 6 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
  • 7 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
  • 8 Geometry constant for Lubrication Life Adjustment Factor a3l.