CAD (0) ▾
  • Cart is empty
  1. Request CAD files
This is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft.
Request Information
Unit of Measure

Key Dimensions

Series

 N/A 1700

Cone Part Number

 N/A 1780

Bore (d)

 N/A 1 in25.4 mm
Dynamic Radial Load Rating - 90M Revs (C90) 1 N/A 2650 lbf11800 N
Dynamic Radial Load Rating - 1M Revs (C1) 2 N/A 10200 lbf45400 N
C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)3 N/A 17800 lbf79100 N
Dynamic Radial Load Rating 2-Row - 90M Revs (C90-2row) 4 N/A 4610 lbf20500 N
K Factor 5 N/A 1.9

Other Dimensions

Inner Ring Width (B)

 N/A 0.781 in19.837 mm
Max Shaft Fillet Radius6 N/A 0.03 in0.8 mm

Shaft Backing Shoulder Diameter - Frontface (da)

 N/A 1.18 in30 mm

Shaft Backing Shoulder Diameter - Backface (db)

 N/A 1.2 in30.5 mm

Cage Location Relative to Frontface (Ab) 

 N/A 0.08 in2 mm

Cage Location Relative to Backface (Aa)

 N/A 0.01 in0.3 mm
Effective Center Location7 N/A -0.27 in-6.9 mm

Weight

 N/A 0.4 lb0.20 Kg

Ratings

Static Radial Load Rating (C0)

 N/A 10200 lbf45300 N
Ca90 - Dynamic Thrust Rating (90 million revolutions)8 N/A 1390 lbf6200 N

Factors

Geometry Factor (Cg)9 N/A 0.0521
  • 1 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
  • 2 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
  • 3 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
  • 4 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
  • 5 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 6 These maximum fillet radii will be cleared by the bearing corners.
  • 7 Negative value indicates effective center inside cone backface.
  • 8 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
  • 9 Geometry constant for Lubrication Life Adjustment Factor a3l.