CAD (0) ▾
  • Cart is empty
  1. Request CAD files
This is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft.
Request Information
Unit of Measure

Key Dimensions

Series

 N/A 275000

Cone Part Number

 N/A EE275108

Bore (d)

 N/A 10.75 in273.05 mm
Dynamic Radial Load Rating - 90M Revs (C90) 1 N/A 59000 lbf262000 N
Dynamic Radial Load Rating - 1M Revs (C1) 2 N/A 228000 lbf1010000 N
C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)3 N/A 396000 lbf1760000 N
Dynamic Radial Load Rating 2-Row - 90M Revs (C90-2row) 4 N/A 103000 lbf457000 N
K Factor 5 N/A 1.45

Other Dimensions

Inner Ring Width (B)

 N/A 2.75 in69.85 mm
Max Shaft Fillet Radius6 N/A 0.25 in6.4 mm

Shaft Backing Shoulder Diameter - Frontface (da)

 N/A 11.46 in291 mm

Shaft Backing Shoulder Diameter - Backface (db)

 N/A 11.85 in301 mm

Cage Location Relative to Frontface (Ab) 

 N/A 0.18 in4.6 mm

Cage Location Relative to Backface (Aa)

 N/A 0.54 in13.7 mm
Effective Center Location7 N/A 0.1 in2.5 mm

Weight

 N/A 127.81 lb57.972 Kg

Ratings

Static Radial Load Rating (C0)

 N/A 359000 lbf1600000 N
Ca90 - Dynamic Thrust Rating (90 million revolutions)8 N/A 40600 lbf181000 N

Factors

G1 Factor

 N/A 1450

G2 Factor

 N/A 201
Geometry Factor (Cg)9 N/A 0.156
  • 1 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
  • 2 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
  • 3 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
  • 4 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
  • 5 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 6 These maximum fillet radii will be cleared by the bearing corners.
  • 7 Negative value indicates effective center inside cone backface.
  • 8 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
  • 9 Geometry constant for Lubrication Life Adjustment Factor a3l.