This is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft.
Unit of Measure

Key Dimensions

Cone Part Number

 N/A EE522102

Bore (d)

 N/A 21.0000 in533.400 mm

Inner Ring Width (B)

 N/A 3.2500 in82.550 mm
Dynamic Radial Load Rating - 1M Revs (C1) 1 N/A 487000 lbf2170000 N
Dynamic Radial Load Rating - 90M Revs (C90) 2 N/A 126000 lbf561000 N
K Factor 3 N/A 1.23

Other Dimensions

Weight

 N/A 578.03 lb262.191 Kg
Effective Center Location4 N/A 2.07 in52.6 mm
Max Shaft Fillet Radius5 N/A 0.25 in6.4 mm

Shaft Backing Shoulder Diameter - Frontface (da)

 N/A 22.44 in570 mm

Shaft Backing Shoulder Diameter - Backface (db)

 N/A 22.68 in576 mm

Cage Location rel. to BF (Aa)

 N/A 0.44 in11.2 mm

Cage Location rel. to FF (Ab)

 N/A 0.47 in11.9 mm

Ratings

Dynamic Axial Rating - 90M Revs (Ca90)6 N/A 103000 lbf457000 N

Static Radial Load Rating (CO)

 N/A 873000 lbf3880000 N

Factors

G1 Factor

 N/A 5013.3

G2 Factor

 N/A 457.2
Geometry Factor (Cg)7 N/A 0.245
  • 1 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
  • 2 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
  • 3 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 4 Negative value indicates effective center inside cone backface.
  • 5 These maximum fillet radii will be cleared by the bearing corners.
  • 6 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
  • 7 Geometry constant for Lubrication Life Adjustment Factor a3l.