CAD (0) ▾
  • Cart is empty
  1. Request CAD files
This is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft.
Request Information
Unit of Measure

Key Dimensions

Series

 N/A M282200

Cone Part Number

 N/A M282249

Bore (d)

 N/A 26.8750 in682.625 mm
Dynamic Radial Load Rating - 90M Revs (C90) 1 N/A 364000 lbf1620000 N
Dynamic Radial Load Rating - 1M Revs (C1) 2 N/A 1400000 lbf6240000 N
C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)3 N/A 2440000 lbf10900000 N
Dynamic Radial Load Rating 2-Row - 90M Revs (C90-2row) 4 N/A 634000 lbf2820000 N
K Factor 5 N/A 1.76

Other Dimensions

Inner Ring Width (B)

 N/A 7.3125 in185.738 mm
Max Shaft Fillet Radius6 N/A 0.38 in9.7 mm

Shaft Backing Shoulder Diameter - Frontface (da)

 N/A 28.46 in723 mm

Shaft Backing Shoulder Diameter - Backface (db)

 N/A 29.06 in738 mm

Cage Location Relative to Frontface (Ab) 

 N/A 0.51 in13 mm

Cage Location Relative to Backface (Aa)

 N/A 0.66 in16.8 mm
Effective Center Location7 N/A -0.6 in-15.2 mm

Weight

 N/A 1936.70 lb878.473 Kg

Ratings

Static Radial Load Rating (C0)

 N/A 3340000 lbf14900000 N
Ca90 - Dynamic Thrust Rating (90 million revolutions)8 N/A 207000 lbf921000 N

Factors

G1 Factor

 N/A 18773

G2 Factor

 N/A 843.1
Geometry Factor (Cg)9 N/A 0.343
  • 1 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
  • 2 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
  • 3 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
  • 4 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
  • 5 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 6 These maximum fillet radii will be cleared by the bearing corners.
  • 7 Negative value indicates effective center inside cone backface.
  • 8 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
  • 9 Geometry constant for Lubrication Life Adjustment Factor a3l.