Menu
Batch CAD Cart (0) ▾
  • Cart is empty
  1. Click Here for Batch Download
Request Information Add to CAD Cart
The configuration of the TDO provides a wide effective bearing spread, making it ideal for applications in which overturning moments are a significant load component. TDO bearings can be used in fixed positions or allowed to float in the housing bore.
Unit of Measure

Specifications

Series

 N/A 67300

Cone Part Number

 N/A 67388

Cup Part Number

 N/A 67322DC

Design Unit

 N/A Inch

Cage Material

 N/A Stamped Steel

Related Assembly Number(s)

 N/A 67388-90183 67388-90186 67388-90212 67388-902A2 67388-902A5

Dimensions

d - Bore

 N/A 5 in127 mm

D - Cup Outer Diameter

 N/A 7.7500 in196.850 mm

B - Cone Width

 N/A 1.8125 in46.038 mm

C - Double Cup Width

 N/A 3.3750 in85.725 mm

T - Bearing Width across Cones

 N/A 4.0000 in101.600 mm

Abutment and Fillet Dimensions

R - Cone Backface "To Clear" Radius1 N/A 0.14 in3.600 mm
r - Cup Backface "To Clear" Radius2 N/A 0.030 in0.8 mm

db - Cone Backface Backing Diameter

 N/A 5.67 in144 mm

Da - Cup Frontface Backing Diameter

 N/A 7.50 in190.50 mm

Aa - Cage-Cone Backface Clearance

 N/A 0.13 in3.3 mm
a - Effective Center Location3 N/A -0.25 in-6.4 mm

Basic Load Ratings

C90 - Dynamic Radial Rating (One-Row, 90 million revolutions)4 N/A 21400 lbf95300 N
C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)5 N/A 144000 lbf640000 N
C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)6 N/A 37300 lbf166000 N
Ca90 - Dynamic Thrust Rating (90 million revolutions)7 N/A 12600 lbf56100 N

Factors

K - Factor8 N/A 1.7
e - ISO Factor9 N/A 0.34
Y1 - ISO Factor10 N/A 1.96
Y2 - ISO Factor11 N/A 2.92
Cg - Geometry Factor12 N/A 0.122
  • 1 These maximum fillet radii will be cleared by the bearing corners.
  • 2 These maximum fillet radii will be cleared by the bearing corners.
  • 3 Negative value indicates effective center inside cone backface.
  • 4 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
  • 5 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
  • 6 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
  • 7 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
  • 8 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 9 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 10 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 11 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 12 Geometry constant for Lubrication Life Adjustment Factor a3l.
By clicking Submit, you consent to the personal information you provide being used in the manner as described in our Privacy Notice, including access to that information by Timken personnel who may be located outside your home country. In addition, you agree that the CAD drawings are for your personal, one-time use only, and that you will not modify or create any compilation or derivative work using the CAD drawings or distribute or display the CAD drawings on any website or other media.