• Timken_TRB_SINGLECUP_TS
  • TRB TS Cup Line Drawing
This is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft.
1476 - 1500 of 1864 | Results Per Page | View | Unit of Measure
« 56 57 58 59 60 »  
Compare Items
Clear Filter

O.D. (D) (in)

O.D. (D) (mm)

Part Number

O.D. (D)

Outer Ring Width (C)

CAD

N/A 44.5000 in1130.300 mm N/A 1.8750 in47.625 mm N/A
N/A 3.8750 in98.425 mm N/A 0.3750 in9.525 mm N/A
N/A 3.9062 in99.217 mm N/A 0.5118 in13.000 mm N/A
N/A 4.1563 in105.570 mm N/A 0.3750 in9.525 mm N/A
N/A 8.5000 in215.900 mm N/A 0.5938 in15.083 mm N/A
N/A 15.0000 in381.000 mm N/A 0.8125 in20.638 mm N/A
N/A 22.2500 in565.150 mm N/A 1.2500 in31.750 mm N/A
N/A 26.0000 in660.400 mm N/A 1.2813 in32.545 mm N/A
N/A 27.0000 in685.800 mm N/A 1.3750 in34.925 mm N/A
N/A 35.5000 in901.700 mm N/A 1.8125 in46.038 mm N/A
N/A 48.0000 in1219.200 mm N/A 1.6875 in42.863 mm N/A
N/A 72.6250 in1844.675 mm N/A 1.6875 in42.863 mm N/A
N/A 26.0000 in660.400 mm N/A 1.3750 in34.925 mm N/A
N/A 27.2441 in692.000 mm N/A 1.3750 in34.925 mm N/A
N/A 56.5000 in1435.100 mm N/A 1.8750 in47.625 mm N/A
N/A 14.1250 in358.775 mm N/A 0.5625 in14.288 mm N/A
N/A 2.8910 in73.431 mm N/A 0.6200 in15.748 mm N/A
N/A 2.8910 in73.431 mm N/A 0.6200 in15.748 mm N/A
N/A 2.8910 in73.431 mm N/A 0.6937 in17.620 mm N/A
N/A 2.8910 in73.431 mm N/A 0.6937 in17.620 mm N/A
N/A 3.2500 in82.550 mm N/A 0.6500 in16.510 mm N/A
N/A 3.2500 in82.550 mm N/A 0.7300 in18.542 mm N/A
N/A 3.2500 in82.550 mm N/A 0.6500 in16.510 mm N/A
N/A 3.2650 in82.931 mm N/A 0.6500 in16.510 mm N/A
N/A 4.5625 in115.888 mm N/A 0.9375 in23.813 mm N/A
1476 - 1500 of 1864 | Results Per Page | View | Unit of Measure
« 56 57 58 59 60 »