• Timken_TRB_SINGLECUP_TS
  • TRB TS Cup Line Drawing
This is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft.
1826 - 1850 of 1864 | Results Per Page | View | Unit of Measure
« 71 72 73 74 75 
Compare Items
Clear Filter

O.D. (D) (in)

O.D. (D) (mm)

Part Number

O.D. (D)

Outer Ring Width (C)

CAD

N/A 21.5000 in546.100 mm N/A 2.6875 in68.263 mm N/A
N/A 21.5000 in546.100 mm N/A 2.6875 in68.263 mm N/A
N/A 17.2460 in438.048 mm N/A 2.1250 in53.975 mm N/A
N/A 3.2500 in82.550 mm N/A 0.795 in20.193 mm N/A
N/A 3.2500 in82.550 mm N/A 0.795 in20.193 mm N/A
N/A 3.500 in88.9 mm N/A 0.7500 in19.050 mm N/A
N/A 2.3437 in59.530 mm N/A 0.7200 in18.288 mm N/A
N/A 2.25 in57.150 mm N/A 0.5800 in14.732 mm N/A
N/A 2.5312 in64.292 mm N/A 0.6563 in16.670 mm N/A
N/A 2.5312 in64.292 mm N/A 0.6563 in16.670 mm N/A
N/A 2.5312 in64.292 mm N/A 0.6563 in16.670 mm N/A
N/A 2.6875 in68.263 mm N/A 0.6875 in17.463 mm N/A
N/A 2.6875 in68.263 mm N/A 0.6875 in17.463 mm N/A
N/A 2.6875 in68.263 mm N/A 0.6875 in17.463 mm N/A
N/A 2.8750 in73.025 mm N/A 0.6875 in17.463 mm N/A
N/A 3 in76.2 mm N/A 0.6875 in17.463 mm N/A
N/A 3.625 in92.075 mm N/A 0.6563 in16.670 mm N/A
N/A 2.3438 in59.533 mm N/A 0.6250 in15.875 mm N/A
N/A 19.6830 in499.948 mm N/A 2.1250 in53.975 mm N/A
N/A 25.5840 in649.834 mm N/A 3.5433 in90 mm N/A
N/A 25.5886 in649.950 mm N/A 2.6870 in68.250 mm N/A
N/A 25.5876 in649.925 mm N/A 2.6725 in67.882 mm N/A
N/A 3.1496 in80 mm N/A 0.8268 in21.001 mm N/A
N/A 3.9380 in100.025 mm N/A 1.0995 in27.927 mm N/A
N/A 8.875 in225.425 mm N/A 1.3125 in33.338 mm N/A
1826 - 1850 of 1864 | Results Per Page | View | Unit of Measure
« 71 72 73 74 75