• Timken_TRB_SINGLECUP_TS
  • TRB TS Cup Line Drawing
This is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft.
1851 - 1864 of 1864 | Results Per Page | View | Unit of Measure
« 71 72 73 74 75 
Compare Items
Clear Filter

O.D. (D) (in)

O.D. (D) (mm)

Part Number

O.D. (D)

Outer Ring Width (C)

CAD

N/A 7.875 in200.025 mm N/A 1.3437 in34.13 mm N/A
N/A 4.4375 in112.712 mm N/A 0.8268 in21.001 mm N/A
N/A 3 in76.2 mm N/A 0.9063 in23.020 mm N/A
N/A 6.9375 in176.213 mm N/A 1.4375 in36.513 mm N/A
N/A 4.8750 in123.825 mm N/A 0.6563 in16.670 mm N/A
N/A 6.3125 in160.338 mm N/A 0.6563 in16.670 mm N/A
N/A 6.9688 in177.008 mm N/A 0.8125 in20.638 mm N/A
N/A 7.1250 in180.975 mm N/A 0.6563 in16.670 mm N/A
N/A 7.6250 in193.675 mm N/A 0.9063 in23.020 mm N/A
N/A 7.5625 in192.088 mm N/A 0.7480 in18.999 mm N/A
N/A 8.7500 in222.250 mm N/A 0.7500 in19.050 mm N/A
N/A 9.5000 in241.300 mm N/A 0.6875 in17.463 mm N/A
N/A 10.0000 in254.000 mm N/A 0.8438 in21.433 mm N/A
N/A 10.2812 in261.142 mm N/A 0.8438 in21.433 mm N/A
1851 - 1864 of 1864 | Results Per Page | View | Unit of Measure
« 71 72 73 74 75