• Timken_TRB_SINGLECUP_TS
  • TRB TS Cup Line Drawing
This is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft.
1376 - 1400 of 1864 | Results Per Page | View | Unit of Measure
« 56 57 58 59 60 »  
Compare Items
Clear Filter

O.D. (D) (in)

O.D. (D) (mm)

Part Number

O.D. (D)

Outer Ring Width (C)

CAD

N/A 31.0000 in787.400 mm N/A 3.2532 in82.631 mm N/A
N/A 38.0000 in965.200 mm N/A 2.4375 in61.913 mm N/A
N/A 3.4375 in87.313 mm N/A 0.5625 in14.288 mm N/A
N/A 3.4375 in87.313 mm N/A 0.5625 in14.288 mm N/A
N/A 3.500 in88.9 mm N/A 0.5937 in15.080 mm N/A
N/A 5.7500 in146.050 mm N/A 0.6563 in16.670 mm N/A
N/A 6.000 in152.4 mm N/A 0.6563 in16.670 mm N/A
N/A 5.7480 in145.999 mm N/A 0.6693 in17.000 mm N/A
N/A 10.0000 in254.000 mm N/A 0.8438 in21.433 mm N/A
N/A 14.7500 in374.650 mm N/A 1.3750 in34.925 mm N/A
N/A 16.0000 in406.400 mm N/A 1.5 in38.1 mm N/A
N/A 16.0000 in406.400 mm N/A 1.5 in38.1 mm N/A
N/A 22.5625 in573.088 mm N/A 2.2500 in57.150 mm N/A
N/A 30.5000 in774.700 mm N/A 2.3750 in60.325 mm N/A
N/A 3.7188 in94.458 mm N/A 0.5938 in15.083 mm N/A
N/A 6.000 in152.4 mm N/A 0.6563 in16.670 mm N/A
N/A 6.1250 in155.575 mm N/A 0.8438 in21.433 mm N/A
N/A 6.3125 in160.338 mm N/A 0.6563 in16.670 mm N/A
N/A 6.2500 in158.750 mm N/A 0.6563 in16.670 mm N/A
N/A 6.3750 in161.925 mm N/A 0.6563 in16.670 mm N/A
N/A 7.5625 in192.088 mm N/A 0.7480 in18.999 mm N/A
N/A 23.5000 in596.900 mm N/A 2.0607 in52.342 mm N/A
N/A 23.5000 in596.900 mm N/A 2.2513 in57.183 mm N/A
N/A 2.3280 in59.131 mm N/A 0.4700 in11.938 mm N/A
N/A 2.3612 in59.974 mm N/A 0.4700 in11.938 mm N/A
1376 - 1400 of 1864 | Results Per Page | View | Unit of Measure
« 56 57 58 59 60 »